BSOD Bugcheck: 0x00000124

Shocks09

Reputable
May 3, 2015
57
0
4,630
This appears in event viewer after BSOD;
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa8004aa7028, 0x00000000ff800000, 0x0000000000000124). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 011716-14274-01.

Any help is appreciated.
 
Solution
Hardware fault is what your getting. If you are overclocking set it to the default speed. And see what happens. If you still get it make sure your memory is seated good (reseat). Make sure the cpu cooler is clean and not allowing the processor to over heat. If none of the above works reinstall hardware drivers one by one and rule those out. The error has to do with the processor not handling interrupts at all at the time.
Hardware fault is what your getting. If you are overclocking set it to the default speed. And see what happens. If you still get it make sure your memory is seated good (reseat). Make sure the cpu cooler is clean and not allowing the processor to over heat. If none of the above works reinstall hardware drivers one by one and rule those out. The error has to do with the processor not handling interrupts at all at the time.
 
Solution