I've been getting bluescreen errors on most of our old computer's that I've been upgrading to windows 10. I do a clean install. The ones that bluescreen typically have a Gigabyte H97-D3H for their motherboard. In this particular case I've tried multiple things. I've checked the CPU temp as well as ran the Intel Diagnostic tool. I've run multiple mem tests. All came back normal, no errors. I've tried reinstalling some of the motherboard drivers, in particular the chipset drivers. I've tried running driver verifier and tried to get it to bluescreen while running, but it just crashes windows without a bluescreen. I've also run the samsung magician to see if there's a bad sector on the ssd, that came back fine as well. I've also flashed the latest BIOS. Is there any chance someone could analyze the dmp files for me? Any suggestions? Also, I'm just realizing I haven't reset the CMOS yet. I'll do that while I wait for a reply.
Heres the build:
Motherboard: H97-D3H
CPU: i7-4790
RAM: DDR3 2x16GB
PSU: Corsair CX600M
SSD: Samsung 860 EVO 500GB
Graphics: Nvidia Quadro K620
Here is the link to the Dump Files: https://www.dropbox.com/s/qohivnk5eswm9ev/Dumps.zip?dl=0
This has been driving me crazy for a long time. Any help is much appreciated. Thanks!
Heres the build:
Motherboard: H97-D3H
CPU: i7-4790
RAM: DDR3 2x16GB
PSU: Corsair CX600M
SSD: Samsung 860 EVO 500GB
Graphics: Nvidia Quadro K620
Here is the link to the Dump Files: https://www.dropbox.com/s/qohivnk5eswm9ev/Dumps.zip?dl=0
This has been driving me crazy for a long time. Any help is much appreciated. Thanks!