Question BSOD Memory_management, after nvme installed

[giffmetango]

So i bought new nvme g3 plus 1tb, install it into pcie 3 slot, i just using phison to check it nand, after awhile it just dismount itself, bsod, restart and check, it disappeared from bios. I just pull it out, put it pack, and tightly the nvme screw (was 90% tight before) this time it show up, but from that day, pc now have randomly BSOD memory_management, until today it have 4times.

https://imgur.com/a/mWm2B4V

View: https://imgur.com/a/mWm2B4V


Before install new nvme, i just using lexar 128GB SSD, and it worked pretty well without any BSOD.

Windows ram test is fine, nothing wrong,

2697v3 (Unlocked bios, undervolt -0.041v)
32GBx2 2133mhz ECC hynix

This morning i just tried to remove undervolt, to see if that causes bsod or not.

By looking into HWInfo, i saw abnormal in CPU

https://imgur.com/Q9Gu74o

View: https://imgur.com/Q9Gu74o

https://imgur.com/GqwdHKq

View: https://imgur.com/GqwdHKq

https://imgur.com/iDL9xDY

View: https://imgur.com/iDL9xDY




Does it also causes the BSOD ? because it much more too high for 2697v3, should i lock cpu state in bios again ?