[SOLVED] bsod slow pc

[Justhea]

Hello
So i had a new pc with a fresh install of windows 10 from their website and most of the time it stutters when i type or just drag stuff inside the desktop or any movement and i got my first bsod on this new computer its really hard to do stuff can someone help
here is the dump file
http://www.mediafire.com/file/y7fn4nb11vfkw2t/070320-19578-01.dmp/file

my specs are
gt1030
450w psu
amd rhyzen 5
8gb kinsgton ram

 

[Colif]

where did you get nvidia drivers from?

is that another BSOD since this post? https://forums.tomshardware.com/threads/blue-screens-and-slow-pc.3620583/#post-21834504

I will get a friend to convert dump

 

[Justhea]

where did you get nvidia drivers from?

is that another BSOD since this post? https://forums.tomshardware.com/threads/blue-screens-and-slow-pc.3620583/#post-21834504

I will get a friend to convert dump

i got it from nvidia website i installed geforce experience and i think it auto installed from their

 

[Colif]

This is still same install as before?
only change is you haven't got the amdsata driver now?

I always suspect Nvidia drivers, last drivers I like of theirs were last year. But I sometimes feel like its a trap to blame them.

What Logitech are you using? wonder if its the Logitech gaming software drivers, as it has been replaced with Logitech G Hub now. Might depend on age of equipment.

I can't read dumps until Gardenman converts them so I won't suggest anything yet based on guesses

 

[gardenman]

Hi, I ran the dump file through the debugger and got the following information: https://pastebin.com/tWwQxDN5

File information:	070320-19578-01.dmp (Jul 3 2020 - 07:35:42)
Bugcheck:	IRQL_NOT_LESS_OR_EQUAL (A)
Probably caused by:	memory_corruption (Process: System)
Uptime:	0 Day(s), 0 Hour(s), 12 Min(s), and 58 Sec(s)

BIOS info was not included in the dump file. This can sometimes mean an outdated BIOS is being used.

This information can be used by others to help you. Someone else will post with more information. Please wait for additional answers. Good luck.

 

[Colif]

try updating LAN drivers - https://www.realtek.com/en/componen...0-1000m-gigabit-ethernet-pci-express-software

Try running memtest86 on each of your ram sticks, one stick at a time, up to 4 passes. Only error count you want is 0, any higher could be cause of the BSOD. Remove/replace ram sticks with errors. Memtest is created as a bootable USB so that you don’t need windows to run it