BSOD's (details inside)

Jul 8, 2018
19
0
10
Hi all,


About a week ago or so (maybe longer) I organised the building of my own desktop. I'll list the parts below. I put windows 10 on the machine and have been adding my own items gradually into the desktop, as you would any desktop, you make it your own.


2 days ago, I've been getting trampled with various different BSOD's. Some the same, but ultimately a wide spectrum.


I've spoken to a few friends and I've updated my BIOS from F4 to F6 (the latest) which only seemed to delay the BSOD's and now they're back in a flurry with ones I've not seen before.


It keeps mentioning memory and someone I was speaking to is adamant it's the graphics driver, so I completely removed everything graphics-y and reinstalled however I had to go into safe mode with networking to complete due to it BSOD'ing 3 times during installation, infuriating.


I've downloaded a BSOD tool thing which says the below;
https://pastebin.com/i4TDd6Rs


The list of items in my build are;
Z370 AORUS GAMING 5 LGA 1151 motherboard
Geforce GTX 1060 graphics
i7core (i7-8700k LGA1151)
Vengeance LPX 2X 8GB
Samsung SSD - V-NAND SSD 850 EVO 1TB
CORSAIR H100i V2 (Missing driver for this but doubt it'd be causing the issues?!)
Seasonic focus gold 650w


This is driving me up the wall, I built this so I could game in peace and it's turning my hair gray... any advice is welcome, if you need any specs please go easy as I'm a total newb when it comes to getting specs and whatnot.


Many thanks for your help,
Xan

EDIT: I've used memtest and system test and what not, all came back fine..
 
Yes but which driver? Is there a way to find out which one? I've updated the BIOS and reinstalled the graphics. I'm not sure what else I can do on it?

Is there a way to tell which driver is the problem?
 


I ran Chkdsk - nothing found. I’m stuck
 
Installed that driver and every other driver had a yellow exclamation mark on it. I’ve began reinstalling windows because I thought ‘sod it’ and half way through the install it BSOD’s... how is this even possible during a bloody install??? The image for the windows was created by Microsoft’s image creator ...
 


Sorry I know you’re trying to help but I really find it hard to understand your messages.

Did you say use an SSD samsung magician?
 
That magician said it's fine and in good condition.
The windows 10 reinstall has stopped and reverted, back to the corrupt state with all my apps back.
Now, the H100I V2 cooling driver I installed has disappeared and won't let me reinstall it because it already exists when it does not.
 
But I only have 1 SSD and don’t want to do a clean install - that means buying Microsoft office and whatnot all over again. I only tried that to see if it would work and out of frustration. Ideally, I’d like to fix this issue.
 


I’ve told you a few times I don’t have an old one. And I don’t want to lose my desktop apps as they cost a lot of money for 1-desktop apps (I’d have to rebuy)