Question Building a new PC using older and new components.

[Algus44]

Approximate Purchase Date: The closer the better.

Budget Range: Less than $1500.

System Usage: Gaming, Videos

Are you buying a monitor: No

Parts to Upgrade: CPU and Cooler, Motherboard, Case, PSU, OS, Network Adapter, Thermal Compound

Do you need to buy OS: Yes

Preferred Website(s) for Parts: Canada, so ideally Bestbuy.ca or Memory Express or Newegg.ca

Location: Canada

Parts Preferences: Nvidia GPU, rest doesn't matter.

Overclocking: Maybe

SLI or Crossfire: Maybe

Your Monitor: TV, 4K

Additional Comments: I'm upgrading from an Aurora R7, so I'd like a case that's big and easy to work in, so I can get get a CPU cooler that will keep and fans that will keep it as cool as possible.

And Most Importantly, Why Are You Upgrading: I'm upgrading from an Aurora R7 and the CPU pump stopped working today and the CPU temps skyrocket to 95C+ while idle and i think its time for an upgrade anyways.

I've linked below what Parts I've already bought or have that have to be part of the new build.

https://ca.pcpartpicker.com/list/Dy8fbK

 

[Darkbreeze]

Are you wanting to go with another AIO cooler or would you prefer to stick with a good air cooler for the CPU?

Do you have ANY specific preferences regarding the case such as tempered glass side panel, availability of external 5.25" drive bays in front, preference for radiator location (IF you want an AIO or custom loop), color, limitations on case dimensions because of where it needs to sit at or anything else that might be relevant or a deal breaker?

Do you have ANY case fans that you are wanting to re-use in this build, and if so, what are the models of those fans? If not, then you should at least nominally plan to either add some or replace what comes with the case (Depending on what it comes with, if any) because usually the ones that are included are low end models with poorer performance than what we'd ever normally recommend especially in terms of static pressure and noise levels. But, cheap fans CAN work fine too, it really depends on the configuration. Desire for RGB/ARGB fan models is also often a consideration these days and something you should decide about ahead of time.

 

[Algus44]

No specifics for anything really, whatever would be best.

If air cooling is better or easier to install I'd rather go with that.

Color and RGB doesn't really matter since I'll be sitting so far away from it and "showing off" wouldn't really be something I'd care about. A side panel might be cool though.

I don't think I'll be reusing any fans so any additional fans I need to buy I would be a definite yes.

 

[Why_Me]

https://ca.pcpartpicker.com/product...a1700-motherboard-tuf-gaming-h670-pro-wifi-d4
Asus TUF GAMING H670-PRO WIFI D4 $233.78

TUF GAMING H670-PRO WIFI D4｜Motherboards｜ASUS Global

TUF Gaming series distills essential elements of the latest AMD and Intel® platforms, and combines them with game-ready features and proven durability. Engineered with military-grade components, an upgraded power solution and a comprehensive set of cooling options, this motherboard delivers...

www.asus.com

https://ca.pcpartpicker.com/product...k-argb-6788-cfm-cpu-cooler-r-ag620-bkanmn-g-2
DeepCool AG620 BK ARGB Dual Tower CPU Cooler $62.39

https://www.deepcool.com/products/C...al-Tower-CPU-Cooler-1700-AM5/2022/16082.shtml

https://www.tomshardware.com/reviews/deepcool-ag620-air-cooler

https://ca.pcpartpicker.com/product...-fully-modular-atx-power-supply-cp-9020200-na
Corsair RM850x (2021) 850W 80+ Gold Modular ATX Power Supply $184.50

https://ca.pcpartpicker.com/product/KKytt6/lian-li-lancool-216-atx-mid-tower-case-lancool-216rx
Lian Li LANCOOL 216 ATX Mid Tower Case $129.99

https://lian-li.com/product/lancool-216/

https://www.tomshardware.com/reviews/lian-li-lancool-216-review

View: https://www.youtube.com/watch?v=ykbhuv6yLBc

 

[Darkbreeze]

No specifics for anything really, whatever would be best.

If air cooling is better or easier to install I'd rather go with that.

Color and RGB doesn't really matter since I'll be sitting so far away from it and "showing off" wouldn't really be something I'd care about. A side panel might be cool though.

I don't think I'll be reusing any fans so any additional fans I need to buy I would be a definite yes.

And do you have a NEED for optical drive bays that can be accessed from the front case, or don't use them (Most just use flash drives these days but there are definitely use cases where the ability to use CD, DVD or BD discs is a necessity. Especially if you tend to burn movies to disk or use optical media for long term backups) at all, or have an external USB drive you use that makes it unnecessary?

And the reason I ask this is that the vast majority of cases these days do NOT have those front drive bays anymore. There are some modern cases with them, but not a lot, and options are very limited unless you want to look at much older case models.

 

[helper800]

I would do this:

PCPartPicker Part List

CPU: Intel Core i7-12700K 3.6 GHz 12-Core Processor (Purchased For $0.00)
CPU Cooler: Deepcool AK620 68.99 CFM CPU Cooler ($80.50 @ Vuugo)
Motherboard: Gigabyte B760M GAMING X AX DDR4 Micro ATX LGA1700 Motherboard ($199.99 @ Memory Express)
Memory: Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 CL16 Memory (Purchased For $0.00)
Storage: Samsung PM961 256 GB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive (Purchased For $0.00)
Storage: Samsung 860 Evo 1 TB 2.5" Solid State Drive (Purchased For $0.00)
Storage: Seagate Barracuda Compute 2 TB 3.5" 7200 RPM Internal Hard Drive (Purchased For $0.00)
Video Card: NVIDIA Founders Edition GeForce RTX 3070 Ti 8 GB Video Card (Purchased For $0.00)
Case: Fractal Design Pop Air ATX Mid Tower Case ($116.78 @ iSanek)
Power Supply: Corsair RM750e 750 W 80+ Gold Certified Fully Modular ATX Power Supply ($129.99 @ Canada Computers)
Total: $527.26
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2023-03-01 13:09 EST-0500

 

[Algus44]

When I got my current PC I got an optical drive but haven't used it once in the last 6 years I've had it, so I don't think so. I do have an external hard drive I can use!

 

[Why_Me]

When I got my current PC I got an optical drive but haven't used it once in the last 6 years I've had it, so I don't think so. I do have an external hard drive I can use!

Two bays for optical drives.

https://ca.pcpartpicker.com/product/mpcG3C/fractal-design-pop-air-atx-mid-tower-case-fd-c-por1a-06

Pop Air

Fractal fuse flair with function in the new Pop series of cases that doesn’t skimp on aesthetics or flexibility. The entire series offers a solid foundation and excellent build quality, giving all users plenty of options and room to maneuver.

www.fractal-design.com

 

[Darkbreeze]

It's not bad, but I wouldn't. RM750e has inferior caps and fan, even compared to the RM much less the RMx, and is mostly an unknown since there are no reputable reviews of the RM750e at this time. Can't recommend it even though the rest of the RM lineup has been pretty good. I do not recommend power supplies, especially from derivative models by Corsair, without a review. Too many times they've pushed inferior platforms with minor name changes. Won't do it.

The AK620 cooler doesn't seem to perform any better than the AG620, and is basically the same design, but is more expensive. CPU coolers (And everything if we're being honest) seem to be thin pickings and very expensive in the Canadian market right now, even more so than usual. Save 20 bucks and just go with the AG620 for same performance which is more than fine. Hell, I have the same 12700k and my Noctua NH-U14S keeps it quite chilly. I don't see the need for anything more on that CPU so long as you are not overclocking and really there is very little to no reason to overclock on 12th and 13th Gen because the margins are minimal and the headroom is low. These 12th/13th Gen i7 and i9 CPUs are already pushing 99% of what they can without getting into dangerous VT-shift and electromigration scenarios for daily drivers.

While I AM a big fan of Fractal design cases, and own two of them myself including my Define S in use on my main rig, I do not really care for the Pop air, and I wouldn't really call it a "large roomy case that's easy to work in" anyhow. The Corsair 4000D airflow IS that big mid tower that has plenty of good features, lots of room to work and has great airflow with the right configuration of fans and cooling. I've not heard ONE SINGLE bad thing, at all, about this case, and a lot of very good feedback on it. Plus, it's about the same price as the smaller Pop air.

I didn't include exceptionally great case fans, but the Corsair SP's are pretty decent for the price. Again, prices there are sky high. Really decent fans are going to run you in the 25-30 dollar range, each, and while there are benefits to paying that including long term quality, that may not be where you want to sink your money into. Or, you might. Maybe it IS worth it to you in which case we could definitely change the case fans for something higher quality like the Noctua A14 chromax.black.swap fans or even something a little less expensive like the Noctua Redux line.

The motherboard, I too went with a non Z model because as I said there is little to be gained by overclocking the CPU on this generation and for the most part, although there ARE a few differences and features found on Z690 and Z790 that are not on the B760 boards, there aren't that many beneficial features worth paying an additional 50-60 bucks for. If those features, such as more lanes on the Z boards is something you want or need, or maybe more USB ports, etc. we can certainly swap out the boards we've recommended on any of these builds for one of the Z boards but the least expensive Z board I'd recommend is closer to the 290-320 range than these others in the 250-ish range. God motherboard prices have gone through the roof and stayed there if you want something that isn't simply bottom of the barrel or low end chipset.

PCPartPicker Part List

CPU: Intel Core i7-12700K 3.6 GHz 12-Core Processor ($419.99 @ Best Buy Canada)
CPU Cooler: Deepcool AG620 67.88 CFM CPU Cooler ($59.99 @ Amazon Canada)
Motherboard: Gigabyte Z690 AORUS ELITE AX DDR4 ATX LGA1700 Motherboard ($299.99 @ Canada Computers)
Memory: G.Skill Ripjaws V 32 GB (2 x 16 GB) DDR4-3600 CL18 Memory ($102.99 @ Newegg Canada)
Storage: Samsung PM961 256 GB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive
Storage: Samsung 860 Evo 1 TB 2.5" Solid State Drive
Storage: Seagate Barracuda Compute 2 TB 3.5" 7200 RPM Internal Hard Drive ($67.75 @ Vuugo)
Video Card: NVIDIA Founders Edition GeForce RTX 3070 Ti 8 GB Video Card
Case: Corsair 4000D Airflow ATX Mid Tower Case ($119.99 @ Best Buy Canada)
Power Supply: Thermaltake Toughpower GF1 ARGB 750 W 80+ Gold Certified Fully Modular ATX Power Supply ($149.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Total: $1265.66
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2023-03-01 13:59 EST-0500

 

[Why_Me]

Approximate Purchase Date: The closer the better.

Budget Range: Less than $1500.

System Usage: Gaming, Videos

Are you buying a monitor: No

Parts to Upgrade: CPU and Cooler, Motherboard, Case, PSU, OS, Network Adapter, Thermal Compound

Do you need to buy OS: Yes

Preferred Website(s) for Parts: Canada, so ideally Bestbuy.ca or Memory Express or Newegg.ca

Location: Canada

Parts Preferences: Nvidia GPU, rest doesn't matter.

Overclocking: Maybe

SLI or Crossfire: Maybe

Your Monitor: TV, 4K

Additional Comments: I'm upgrading from an Aurora R7, so I'd like a case that's big and easy to work in, so I can get get a CPU cooler that will keep and fans that will keep it as cool as possible.

And Most Importantly, Why Are You Upgrading: I'm upgrading from an Aurora R7 and the CPU pump stopped working today and the CPU temps skyrocket to 95C+ while idle and i think its time for an upgrade anyways.

I've linked below what Parts I've already bought or have that have to be part of the new build.

https://ca.pcpartpicker.com/list/Dy8fbK

I was under the impression you had already purchased the components in your link.

3600mhz RAM to give you that extra boost not to mention low profile heatsinks so it doesn't impede your cpu cooler.

https://ca.pcpartpicker.com/product...2-x-16-gb-ddr4-3600-memory-cmk32gx4m2d3600c18

If you haven't already purchased that cpu then save a few dollars.

https://ca.pcpartpicker.com/product...12700f-21-ghz-12-core-processor-bx8071512700f
Intel Core i7-12700F $398.95

https://ark.intel.com/content/www/u...2700f-processor-25m-cache-up-to-4-90-ghz.html
Processor Base Power: 65W
Maximum Turbo Power: 180W

https://www.techspot.com/review/2391-intel-core-i7-12700/

i7 12700 / 12700F gaming benchmarks.

 

[Why_Me]

It's not bad, but I wouldn't. RM750e has inferior caps and fan, even compared to the RM much less the RMx, and is mostly an unknown since there are no reputable reviews of the RM750e at this time. Can't recommend it even though the rest of the RM lineup has been pretty good. I do not recommend power supplies, especially from derivative models by Corsair, without a review. Too many times they've pushed inferior platforms with minor name changes. Won't do it.

The AK620 cooler doesn't seem to perform any better than the AG620, and is basically the same design, but is more expensive. CPU coolers (And everything if we're being honest) seem to be thin pickings and very expensive in the Canadian market right now, even more so than usual. Save 20 bucks and just go with the AG620 for same performance which is more than fine. Hell, I have the same 12700k and my Noctua NH-U14S keeps it quite chilly. I don't see the need for anything more on that CPU so long as you are not overclocking and really there is very little to no reason to overclock on 12th and 13th Gen because the margins are minimal and the headroom is low. These 12th/13th Gen i7 and i9 CPUs are already pushing 99% of what they can without getting into dangerous VT-shift and electromigration scenarios for daily drivers.

While I AM a big fan of Fractal design cases, and own two of them myself including my Define S in use on my main rig, I do not really care for the Pop air, and I wouldn't really call it a "large roomy case that's easy to work in" anyhow. The Corsair 4000D airflow IS that big mid tower that has plenty of good features, lots of room to work and has great airflow with the right configuration of fans and cooling. I've not heard ONE SINGLE bad thing, at all, about this case, and a lot of very good feedback on it. Plus, it's about the same price as the smaller Pop air.

I didn't include exceptionally great case fans, but the Corsair SP's are pretty decent for the price. Again, prices there are sky high. Really decent fans are going to run you in the 25-30 dollar range, each, and while there are benefits to paying that including long term quality, that may not be where you want to sink your money into. Or, you might. Maybe it IS worth it to you in which case we could definitely change the case fans for something higher quality like the Noctua A14 chromax.black.swap fans or even something a little less expensive like the Noctua Redux line.

The motherboard, I too went with a non Z model because as I said there is little to be gained by overclocking the CPU on this generation and for the most part, although there ARE a few differences and features found on Z690 and Z790 that are not on the B760 boards, there aren't that many beneficial features worth paying an additional 50-60 bucks for. If those features, such as more lanes on the Z boards is something you want or need, or maybe more USB ports, etc. we can certainly swap out the boards we've recommended on any of these builds for one of the Z boards but the least expensive Z board I'd recommend is closer to the 290-320 range than these others in the 250-ish range. God motherboard prices have gone through the roof and stayed there if you want something that isn't simply bottom of the barrel or low end chipset.

PCPartPicker Part List

CPU: Intel Core i7-12700K 3.6 GHz 12-Core Processor ($419.99 @ Best Buy Canada)
CPU Cooler: Deepcool AG620 67.88 CFM CPU Cooler ($59.99 @ Amazon Canada)
Motherboard: Gigabyte Z690 AORUS ELITE AX DDR4 ATX LGA1700 Motherboard ($299.99 @ Canada Computers)
Memory: G.Skill Ripjaws V 32 GB (2 x 16 GB) DDR4-3600 CL18 Memory ($102.99 @ Newegg Canada)
Storage: Samsung PM961 256 GB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive
Storage: Samsung 860 Evo 1 TB 2.5" Solid State Drive
Storage: Seagate Barracuda Compute 2 TB 3.5" 7200 RPM Internal Hard Drive ($67.75 @ Vuugo)
Video Card: NVIDIA Founders Edition GeForce RTX 3070 Ti 8 GB Video Card
Case: Corsair 4000D Airflow ATX Mid Tower Case ($119.99 @ Best Buy Canada)
Power Supply: Thermaltake Toughpower GF1 ARGB 750 W 80+ Gold Certified Fully Modular ATX Power Supply ($149.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Total: $1265.66
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2023-03-01 13:59 EST-0500

Just curious but what exactly does the Corsair 4000D Airflow ($165 after adding fans) have over the $130 Lian Li Lancool 216?

 

[Why_Me]

This eliminates the old school mechanical drive while allowing you to run dual M.2 SSD's. Plenty of ARGB for a build that will run cool.

https://ca.pcpartpicker.com/product/KKytt6/lian-li-lancool-216-atx-mid-tower-case-lancool-216rx
Lian Li LANCOOL 216 ATX Mid Tower Case $129.99

https://ca.pcpartpicker.com/product...-fully-modular-atx-power-supply-cp-9020200-na
Corsair RM850x (2021) 850W 80+ Gold Modular ATX Power Supply $184.50

https://ca.pcpartpicker.com/product...a1700-motherboard-tuf-gaming-h670-pro-wifi-d4
Asus TUF GAMING H670-PRO WIFI D4 $233.78

https://ca.pcpartpicker.com/product...12700f-21-ghz-12-core-processor-bx8071512700f
Intel Core i7-12700F $398.95

https://ca.pcpartpicker.com/product...k-argb-6788-cfm-cpu-cooler-r-ag620-bkanmn-g-2
DeepCool AG620 BK ARGB Dual Tower CPU Cooler $62.39

https://ca.pcpartpicker.com/product...2-x-16-gb-ddr4-3600-memory-cmk32gx4m2d3600c18
Corsair Vengeance LPX DDR4-3600 32GB (2x16GB) CL18 $109.99

https://ca.pcpartpicker.com/product...tb-m2-2280-nvme-solid-state-drive-wds200t3x0e
Western Digital Black SN770 2TB M.2 PCIe 4.0 x4 NVME SSD $159.99

https://ca.pcpartpicker.com/product/hMYmP6/microsoft-windows-11-home-retail-usb-64-bit-haj-00108
Microsoft Windows 11 Home Retail USB 64-bit $172.99

Total: $1452.58 CAD

 

[Algus44]

It's not bad, but I wouldn't. RM750e has inferior caps and fan, even compared to the RM much less the RMx, and is mostly an unknown since there are no reputable reviews of the RM750e at this time. Can't recommend it even though the rest of the RM lineup has been pretty good. I do not recommend power supplies, especially from derivative models by Corsair, without a review. Too many times they've pushed inferior platforms with minor name changes. Won't do it.

The AK620 cooler doesn't seem to perform any better than the AG620, and is basically the same design, but is more expensive. CPU coolers (And everything if we're being honest) seem to be thin pickings and very expensive in the Canadian market right now, even more so than usual. Save 20 bucks and just go with the AG620 for same performance which is more than fine. Hell, I have the same 12700k and my Noctua NH-U14S keeps it quite chilly. I don't see the need for anything more on that CPU so long as you are not overclocking and really there is very little to no reason to overclock on 12th and 13th Gen because the margins are minimal and the headroom is low. These 12th/13th Gen i7 and i9 CPUs are already pushing 99% of what they can without getting into dangerous VT-shift and electromigration scenarios for daily drivers.

While I AM a big fan of Fractal design cases, and own two of them myself including my Define S in use on my main rig, I do not really care for the Pop air, and I wouldn't really call it a "large roomy case that's easy to work in" anyhow. The Corsair 4000D airflow IS that big mid tower that has plenty of good features, lots of room to work and has great airflow with the right configuration of fans and cooling. I've not heard ONE SINGLE bad thing, at all, about this case, and a lot of very good feedback on it. Plus, it's about the same price as the smaller Pop air.

I didn't include exceptionally great case fans, but the Corsair SP's are pretty decent for the price. Again, prices there are sky high. Really decent fans are going to run you in the 25-30 dollar range, each, and while there are benefits to paying that including long term quality, that may not be where you want to sink your money into. Or, you might. Maybe it IS worth it to you in which case we could definitely change the case fans for something higher quality like the Noctua A14 chromax.black.swap fans or even something a little less expensive like the Noctua Redux line.

The motherboard, I too went with a non Z model because as I said there is little to be gained by overclocking the CPU on this generation and for the most part, although there ARE a few differences and features found on Z690 and Z790 that are not on the B760 boards, there aren't that many beneficial features worth paying an additional 50-60 bucks for. If those features, such as more lanes on the Z boards is something you want or need, or maybe more USB ports, etc. we can certainly swap out the boards we've recommended on any of these builds for one of the Z boards but the least expensive Z board I'd recommend is closer to the 290-320 range than these others in the 250-ish range. God motherboard prices have gone through the roof and stayed there if you want something that isn't simply bottom of the barrel or low end chipset.

PCPartPicker Part List

CPU: Intel Core i7-12700K 3.6 GHz 12-Core Processor ($419.99 @ Best Buy Canada)
CPU Cooler: Deepcool AG620 67.88 CFM CPU Cooler ($59.99 @ Amazon Canada)
Motherboard: Gigabyte Z690 AORUS ELITE AX DDR4 ATX LGA1700 Motherboard ($299.99 @ Canada Computers)
Memory: G.Skill Ripjaws V 32 GB (2 x 16 GB) DDR4-3600 CL18 Memory ($102.99 @ Newegg Canada)
Storage: Samsung PM961 256 GB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive
Storage: Samsung 860 Evo 1 TB 2.5" Solid State Drive
Storage: Seagate Barracuda Compute 2 TB 3.5" 7200 RPM Internal Hard Drive ($67.75 @ Vuugo)
Video Card: NVIDIA Founders Edition GeForce RTX 3070 Ti 8 GB Video Card
Case: Corsair 4000D Airflow ATX Mid Tower Case ($119.99 @ Best Buy Canada)
Power Supply: Thermaltake Toughpower GF1 ARGB 750 W 80+ Gold Certified Fully Modular ATX Power Supply ($149.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Case Fan: Corsair SP140 49.49 CFM 140 mm Fan ($14.99 @ Amazon Canada)
Total: $1265.66
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2023-03-01 13:59 EST-0500

I like this build but the compatibility issues at the bottom have me worried. Would it be better to get a different PSU like the Corsair RM850X? I don't see it saying an compatibility issues when I swap that one in.

And about the daisy chaining with the GPU I'm not really sure what that means. I'm guessing all the physical compatibility issues that can't be checked should be fine since you were saying it is a bigger case?

 

[Darkbreeze]

The ONLY thing among the "compatibility issues" that could even BE a concern, is the adapter. And the adapter issues have already been addressed through MANY, MANY reviews. It's a non-issue so long as you MAKE SURE YOU HAVE FULLY SEATED THE CONNECTORS. Which, most THOUGHT they did, but did not. Now, you CAN of course get a fully ATX 3.0 compatible PSU without need for an adapter, but you STILL have to make sure the 16 pin connector is fully seated, because due to the nature of the connection, if it's not, you WILL likely have issues. If you are NOT familiar with these issues, say so, and I'll link you to the relevant information so you can familiarize yourself with it.

The rest, standard. Non-issue.

 

[Algus44]

Perfect, thanks so much for all your help and advice! I've ordered the relevant parts and within a couple days hopefully I'll have a much more powerful and quiet PC

 

[Darkbreeze]

You will not be unhappy, I am really damn sure of that. What exactly did you end up going with if you don't mind sharing the full build you decided on in it's entirety just for whoever might come along with a similar need?

 

[Algus44]

I went with the build you recommended in your post, except I went with the upgraded fans you mentioned, the Noctua A14 x3. I have the case in but still waiting on other parts, should I use those 3 fans for the front (meaning get rid of the 1 front fan that came with the case) but use the one in the back that the cade came with?

Also will the DeepCool Cpu Cooler be fine once the tempered glass is put on? Most builds I see use AIO coolers, or does it really matter? Like you were saying I have no plans so OC the CPU so.

 

[Darkbreeze]

Myself, I'd say to put two of those fans in the front as intakes and one in the TOP-rear location as exhaust. The case already comes with a 120mm rear Corsair fan in the rear fan location as an exhaust, which you can use, or if you want it would not be the worst thing in the world to take it out an put one of these in it's place.

https://noctua.at/en/products/fan/nf-f12-pwm-chromax-black-swap

 

[Algus44]

So the Deepcool CPU Cooler doesn't fit properly on the motherboard. The copper pipes are just a little bit too big and it won't go on properly without modification to the MOBO. Further research suggests that this is a common problem with the Z690 board about trying to get the Deepcool and Noctua air coolers to fit. Guess I'll be looking for an AIO cooler that fits...

 

[helper800]

So the Deepcool CPU Cooler doesn't fit properly on the motherboard. The copper pipes are just a little bit too big and it won't go on properly without modification to the MOBO. Further research suggests that this is a common problem with the Z690 board about trying to get the Deepcool and Noctua air coolers to fit. Guess I'll be looking for an AIO cooler that fits...

Sorry to hear that. Unfortunately its impossible to know what motherboards are compatible with what coolers when motherboard manufacturers start making bigger VRM heatsinks.

 

[Darkbreeze]

So the Deepcool CPU Cooler doesn't fit properly on the motherboard. The copper pipes are just a little bit too big and it won't go on properly without modification to the MOBO. Further research suggests that this is a common problem with the Z690 board about trying to get the Deepcool and Noctua air coolers to fit. Guess I'll be looking for an AIO cooler that fits...

Eh, I find this hard to believe. I have a standard Noctua cooler on a Z690 board AND I've had a couple of other coolers on it as well while it was on the test bench. A Gammaxx 400 v2 AND a Thermalright Assassin X SE, before putting my U14S on it and permanently mounting it in my case. There's nothing fundamentally different or unique about the way the heat pipes on that Deepcool cooler are laid out either.

Do you have some link to reference of this "problem" or is this just some yahoos on Reddit that had trouble and indicated it was "a problem" on these boards? Because there there is nothing fundamentally wrong or different about anything to do with the Z690 configuration or socket from any prior Intel socket. In fact, any of these coolers now should be coming with the right adapter for the socket even if they didn't originally come with it and ALL of these companies will generally ship you an adapter IF you need one and happen to get one that didn't include it in the box for free.

Copper pipes shouldn't be anywhere near the "motherboard" anyhow. They are above the baseplate and there is nothing that should actually even be able to interfere with them in any case. What is it that you believe they are interefering WITH? Got pictures or links?