[SOLVED] Buying a brand new case

[levi19982]

I finally found a case good to me, it's an InWin 101. I have an EVGA Supernova 1300 G2 PSU, which is 20 cm long and a SilentiumPC Fortis 3 EVO ARGB, which is 15.8 cm high. It says that the PSU compatibility is ATX12V and up to 200 mm, so I guess my PSU would fit in and maximum CPU Cooler height is 160 mm so it would fit as well. Am I right?

 

[logainofhades]

Yes that should fit, though the fit might be a bit tight.

 

[levi19982]

I now foudn Corsair iCUE 4000X, it says that a PSU with a size of 180 mm would fit in, but if HDD cage is removed the maximum length is 220 mm for PSU. If I remove HDD cage can I put my hdd somewhere else or something?

 

[DSzymborski]

I don't think there's anywhere to put it naturally. You'd have to be creative and do a little bit of engineering on your own. Are you sure you need a 1300W PSU?

 

[logainofhades]

How much are you looking to spend on such case? Any particular features you are after?

 

[levi19982]

The problem is that I already bought the PSU and I don't intend to change it. I would just like that my PSU (20 cm long) and my CPU cooler (15.8 cm high) would fit in the case. I would like to spend maximum 90-100 dollars

 

[logainofhades]

This one appears to meet those requirements, while being under budget. I use an ITX metallic gear case, myself.

https://www.newegg.com/black-white-metallic-gear-neo-air-atx-mid-tower/p/N82E16811854093

 

[levi19982]

I like it so much, but as I live in Hungary a very bad place, this case cannot be delievered to Hungary. Can you recommend another one? I am sorry

 

[logainofhades]

This one I believe will work. The HDD's mount behind the back panel, so no cage to deal with.

https://hu.pcpartpicker.com/product/yLDzK8/fractal-design-case-fdcadefsbkw

• PSU max length
  180/170 mm with a bottom 120/140 mm fan installed or 300 mm when not using any bottom fan