[SOLVED] Can’t fit motherboard into case

[BPR96]

pictures below

I have an MSI TOMAHAWK MAX motherboard with a Antec NX400 case,

the case has the correct port holes to accommodate the motherboard, however I can’t seem to line it up correctly, I’m not sure if it’s the IO shield, if maybe I need to bend the pins or something, I can’t seem to get the ports in the holes correctly as well as lining up the board with the stand offs

any help on how to fit them in? Thanks

https://imgur.com/a/rBnYIm6

View: https://imgur.com/a/rBnYIm6

 

[helpstar]

You will have to push a bit to align it.
Be sure all stand offs are placed correctly, like written in the manual of the motherboard

View: https://www.youtube.com/watch?v=IhX0fOUYd8Q

 

[BPR96]

You will have to push a bit to align it.
Be sure all stand offs are placed correctly, like written in the manual of the motherboard

View: https://www.youtube.com/watch?v=IhX0fOUYd8Q

Thanks for the reply! I managed to get it in, I first focused on lining it up with the standoffs and then when I checked the ports were lined up and they just needed a small adjustment to fit in, all is good now. Thank you

 

[helpstar]

You are welcome