[SOLVED] Can’t get new pc to boot to bios.

[Ronanp98]

I am having an issue where I turn on the pc and the fans run on for a second then shut off leaving just rgb lights and case fans powered. When I turn it on all qled’s turn on and off one by one. Dram first then cpu, and vga. VGA stays on and boot led soon also turns on and both of those stay solid. Any ideas how I can fix this??

Here are my parts:


CPU: AMD Ryzen 7 3700X 3.6 GHz 8-Core Processor
CPU Cooler: NZXT Kraken X62 Rev 2 98.17 CFM Liquid CPU Cooler
Motherboard: Asus TUF GAMING X570-PLUS (WI-FI) ATX AM4 Motherboard
Memory: Corsair Vengeance RGB Pro 16 GB (2 x 8 GB) DDR4-3200 Memory
Storage: Samsung 860 Evo 500 GB 2.5" Solid State Drive
Storage: Seagate Barracuda Compute 2 TB 3.5" 7200RPM Internal Hard Drive
Video Card: EVGA GeForce RTX 2070 8 GB XC GAMING Video Card
Power Supply: EVGA SuperNOVA G3 650 W 80+ Gold Certified Fully Modular ATX Power Supply

 

[viperdg]

Are the leds red or green in color.

 

[Ronanp98]

Are the leds red or green in color.

Sorry I’m dumb. I didn’t have my dp cable hooked up to the gpu... however I see the bios now and it’s saying it doesn’t detect the cpu fan, but I have the 3 pin connector from the cooler hooked up to the cpu fan spot so I’m not sure why it’s not detecting it..

 

[viperdg]

Its goinjg to the header which is usually labeled cpu_fan. WHat kind of cooler do you have.

 

[viperdg]

Also most motherboards have 4 pin fan headers. If your using a 3 pin fan make sure the plug is in front of the tab you will see sticking up from that header to be on the correct 3 pins.

 

[Ronanp98]

Sorry, all good. The kraken water cooler brushed over another power cable I needed to plug in, in the instruction manual. Everything is working now sorry for wasting anybody’s time.

 

[viperdg]

No problem at all. Have a nice day and enjoy your PC.