Question Can’t install GPU to my mb

[steneerik.valliste]

So im trying to install my gpu to mb but one side( where is hdmi dp and more) But right side goes easily in nothing cant bothering it because I took it out two days ago. any ideas?

 

[WildCard999]

Is there a clip or lever on the PCIE slot where the GPU goes in? If so you may need to open it up for the GPU to go in.

You may need to take a few pictures of your issue and upload them here as that should help us help you better.

 

[steneerik.valliste]

View: https://imgur.com/gallery/2iysH39

View: https://imgur.com/gallery/RolGnFw

View: https://imgur.com/gallery/9f3KnPN

 

[WildCard999]

So from the looks of the latch it's one of the ones that needs to be pushed down towards the bottom connection on the motherboard to release the card but shouldn't affect you putting the card in. You may just need to line it up and give it a good push to go back in the slot as I don't see anything else that obstructing it. It may also be the angle of the picture but it looks like that cover where the HDMI/DP ports are on the GPU is bent...If so you'll need to straighten it out for it to fit correctly.

 

[steneerik.valliste]

View: https://imgur.com/gallery/Iir8VK4
After bending those I still end up at a same problem

 

[steneerik.valliste]

After pushing it, this pops out and ends up at a same position

 

[ko888]

Did you install the motherboard standoffs to raise the motherboard to the correct height from the motherboard tray?

 

[WildCard999]

View: https://imgur.com/gallery/Iir8VK4
After bending those I still end up at a same problem

Is that tab fitting between the MB & Case? It has to for that card to fit into the PCIE slot.

 

[steneerik.valliste]

Is that tab fitting between the MB & Case? It has to for that card to fit into the PCIE slot.

Yes it fits perfectly, I took my GPU out only 2 Days ago it needs to fit in to the slot but it doesnt thats quite annoying for me

 

[steneerik.valliste]

View: https://imgur.com/gallery/N9tmVoz
If helps

 

[alceryes]

Sometimes the tab part of the video card bracket gets bent a little preventing you from inserting it in all the way.

See here - http://www.playtool.com/pages/installvid/install.html
About 3/4 of the way down the page is a picture of a video card. The "tab" is what I am referring to.

 

[steneerik.valliste]

Sometimes the tab part of the video card bracket gets bent a little preventing you from inserting it in all the way.

See here - http://www.playtool.com/pages/installvid/install.html
About 3/4 of the way down the page is a picture of a video card. The "tab" is what I am referring to.

Why is this tab even needed for

 

[steneerik.valliste]

After bending tabs into right position i made it so far that those golden fingers are equally in the center but do I need to use power to push them fully into this, they dont go easily

 

[WildCard999]

It can take a bit of force to push it into the slot as your also going past the release clip as well.

 

[steneerik.valliste]

after a few tries I finally manage to install my gpu thank you for all the help, Hope Didnt damaged my gpu somehow