Question Can anyone please help me to set my fan speed settings correctly ?

Feb 22, 2021
11
0
4,510
Hello,

i finally caved and updated my bios after my pc kept shutting down the monitors and video card randomly. I thought i was smart and took pictures of everything needed but of course apparently the bios settings reset after updating it for some stupid reason and i did not take pictures of the fan settings the guy who built my pc set so it went from quiet and loud when working hard to always loud and it feels like its hotter (even though it says its only around 40) and im probably imagining it but it smells burnt (even though the pc was on at most 15-20m) and i swear i had more fans to customize but now its back to cpu 1 and pump 1 after hitting default settings after being stupid with the fans and panicking.

The guy who fixed my pc seems to have been gone for 10 days from the platform whwre i bought his services no help there no atm and i want to use my pcI have a MSI MAG B650 TOMAHAWK WIFI motherboard with the newest bios, a Fractal Design Pop XL Air RGB - White TG Clear Tint with stock fans in stock position and an Arctic Liquid Freezer III 360 A-RGB mounted with the fans shooting hot air up.

Can anyone edit the screenshots and make red dots where i should place these curves and what sort of dc/wmp setting i should have. I mostly play games with little else. Im very sorry for asking but im very bad with this stuff, very afraid of damaging anything and have no funds to replace anything
Link to settings

The games are rust, stellaris max settings, Mc modded or vanilla, skyrim heavily modded, projekt zomboid or elden ring
 
Im well aware but its so noisey now its unusuable to do anything on so i need the noise lower
Which exact CPU ? Most of Ryzen new gen are good up to 90-95c without throttling so on that AIO cooler I would set maximum fan speed at those temps depending on CPU.
With 7900x and same AIO cooler I set fan curve in straight line, from minim RPM at 50c to maximum at 95c. Also set fan function to PWM instead of auto.
 
Which exact CPU ? Most of Ryzen new gen are good up to 90-95c without throttling so on that AIO cooler I would set maximum fan speed at those temps depending on CPU.
With 7900x and same AIO cooler I set fan curve in straight line, from minim RPM at 50c to maximum at 95c. Also set fan function to PWM instead of auto.
My other important components are
ASUS GeForce RTX 4080 SUPER ProArt OC - 16GB GDDR6
AMD Ryzen 7 7800X3D
I would happily pay if you could draw on the images as i dont understand
 
My other important components are
ASUS GeForce RTX 4080 SUPER ProArt OC - 16GB GDDR6
AMD Ryzen 7 7800X3D
I would happily pay if you could draw on the images as i dont understand
Tjmax aka highest temp is 89c and has 120W TDP so that cooler should cool it at half power. Radiator fan speed is not determining factor, I could even shut one down or slow all to 1000 Rpm without temperature raising. Pump on the other hand is more important and should run at full speed all the time. It's possible it's not installed properly and with proper TIM
You can adjust fan speed curve by dragging those points up and down, Try setting max RPM at 1000Rpm and check temps, any under 89c would be fine and at that rpm they are virtually quiet.