Question Can i do this?

[derrekeva]

I got a asus strix x570-e MB and ordered g skill trident z neo 32 gb(2x16) for 3600
F4-3600C16D-32 GTZNC
Question is. I accidentally ordered 2 sets of the memory . Can I put 4 sticks of this kind together to get 64 gb or are these 2 sticks specific.
Derreke

 

[COLGeek]

You should be able to install all 4 sticks of memory. No worries.

ASUS USA

ASUS is a leading company driven by innovation and commitment to quality for products that include notebooks, netbooks, motherboards, graphics cards, displays, desktop PCs, servers, wireless solutions, mobile phones and networking devices. ASUS ranks among BusinessWeek’s InfoTech 100 for 12...

www.asus.com

 

[derrekeva]

thank you. better to ask than to make a significant mistake.
derreke

 

[gskill support]

Rated specifications (XMP Profile) is 2 sticks specific, so you will need to test the two kits to see how well they can perform together. Use the latest BIOS for best results. Let us know how it goes.

 

[ricardojuan08]

I got a asus strix x570-e MB and ordered g skill trident z neo 32 gb(2x16) for 3600
F4-3600C16D-32 GTZNC
Question is. I accidentally ordered 2 sets of the memory . Can I put 4 sticks of this kind together to get 64 gb or are these 2 sticks specific.
Derreke

Hello Derrek, how was it? Did it work? I got the same memory F4-3600C16D-32GTZNC. I am planning to buy another set just in case it will work.

 

[derrekeva]

Hello Derrek, how was it? Did it work? I got the same memory F4-3600C16D-32GTZNC. I am planning to buy another set just in case it will work.

I will know in a couple days. I didnt get to start putting it together until last night. I'll let you know

 

[ricardojuan08]

@derrekeva Thanks! I wonder if I it will work and can still reach 3600Mhz at 64Gb.

 

[theoneandonlyfoohyking]

When you install the sticks, make sure to install them together in a proper dual channel configuration:

For example, let's take the first pack of RAM. Those sticks should go in the 1st and 3rd slots. The other set should go in the 2nd and 4th slots. Correct me if i'm wrong

 

[SlugBugBuddy]

When you install the sticks, make sure to install them together in a proper dual channel configuration:

For example, let's take the first pack of RAM. Those sticks should go in the 1st and 3rd slots. The other set should go in the 2nd and 4th slots. Correct me if i'm wrong

No, this is correct.
most motherboard's manuals also show the best optimized RAM config for single, dual, and quad sticks
1st pack of 2 in DIMMA1 and B1, 2nd pack in DIMMA2 and B2