Can I run HyperX Fury 2x8GB (hx316c10fbk2/16) and Corsair Dominator Platinum 2x8 GB (CMD16GX3M2A1600C9) in the same build?

[CrudeGaming]

I have currently HyperX Fury installed in my PC, And i got my hands on Corsair Dominator Platinum, will it work if i installed both kits in my PC?

As far as i can tell HyperX is CL10, while Dominator is CL9. I have both kits, so there is no question if i should or shouldnt buy any of them, but if I can run them in the same build, and if not, which kit should i use for best results in gaming (FPS)
HyperX Fury 2x8GB (hx316c10fbk2/16)
Corsair Dominator Platinum 2x8 GB (CMD16GX3M2A1600C9)
Mobo: Rog Maximus VII Ranger
CPU: i7-4790k

 

[KLawinger]

only way to tell is test it out, memory is very finicky and wont work sometimes if the CL's are different or different clock speeds. But go ahead and try it since you have both kits

 

[CrudeGaming]

Allright, i will give it a go, do you think there is a chance that some components will be damaged?

 

[KLawinger]

Allright, i will give it a go, do you think there is a chance that some components will be damaged?

no chance, if they dont work then it wont boot. If they do you can fiddle with the bios and try and get it to work ideally

 

[CrudeGaming]

pc started without a problem, it says i have 32768 MB ram working at 1866 MHz and 1.507 V, i have not tweaked anything in bios myself, should I? cant seem to find individual ram stick speeds in there

 

[KLawinger]

pc started without a problem, it says i have 32768 MB ram working at 1866 MHz and 1.507 V, i have not tweaked anything in bios myself, should I? cant seem to find individual ram stick speeds in there

if it works and everything is detected then you're good to go! nothing more to do.