Question Can I use HyperX Savage 4GB 2133 DDR3 CL11 DIMM XMP on this MOBO??

[Sub Atomic Genius]

<-:directly from HPs support page:->
-HP Aloe 537376-001
-Manufacturer's motherboard name: H-RS880-uATX
-HP/Compaq name: Aloe
-Memory upgrade information:
-Four DDR3 DIMM (240-pin) sockets
-Supports 1 GB, 2 GB, and 4 GB DDR3 DIMMs per socket
-Supports Dual channel memory architecture
-Supported speeds
-PC3-10600 @ 1333 MHz
-PC3-8500 @ 1066 MHz...
I'm not trying to get someone else to do my homework for me... But I've been 'racking my brains' all day on this, and I've not arrived at a conclusion...
I really could use an extra set of eyes, so they say...
Thanx

 

[Lutfij]

What processor are you working with at the time of writing? Regardless of what ram kit you're going to drop(one's that are rated for speeds higher than DDR3-1333MHz) the ram will be downclocked. In this regard, you're probably going to be paying premium for a DDR3-2133MHz am kit but the ram kit will run at DDR3-1333MHz, provide that the motherboard will work with higher spec'd rams.

What rams are you working with?

 

[Sub Atomic Genius]

What processor are you working with at the time of writing? Regardless of what ram kit you're going to drop(one's that are rated for speeds higher than DDR3-1333MHz) the ram will be downclocked. In this regard, you're probably going to be paying premium for a DDR3-2133MHz am kit but the ram kit will run at DDR3-1333MHz, provide that the motherboard will work with higher spec'd rams.

What rams are you working with?

HyperX Savage 4GB 2133MHz CL11 DDR3 - (HX321C11SR/4)
The processor is an AMD Athlon II X4 630

 

[Sub Atomic Genius]

HyperX Savage 4GB 2133MHz CL11 DDR3 - (HX321C11SR/4)

I'm really just trying to mix two machines together in the blender, and to pour out on the table the BEST machine I can build from all the parts I have laying around... Suffice it to say that "I want a new dinosaur, cuz I don't like the dinosaur I've got"... hahaha