Question Can I use my PSU's 8-pin CPU connector on the motherboard's 4-pin connector ?

[ayeooo444]

I am upgrading and I got an ASRock 450M Micro ATX motherboard.
I had no idea they use a 4-pin CPU connector whereas my PSU's CPU connector is an 8-pin.
Can i use half of the 8-pin to connect to the motherboard without it frying anything?
A lot of people said its fine but I'm not sure if I have to buy an adapter?

 

[bill001g]

Do you have a link to the motherboard there are a couple with similar names. All the ones I found photos of have 8 pin connections.

It is rather uncommon to only use 4 pin connectors.

That is exactly why you can split the 8 pin connector. Pretty much what they did as modern cpu needed more power they just added 4 extra pins, but to allow use of older boards you can physically separate it.

The power stuff is designed to prevent you from doing things wrong. Unless you would apply a lot of force you generally can't plug something into the wrong slot.

 

[SkyNetRising]

Do you have a link to the motherboard there are a couple with similar names. All the ones I found photos of have 8 pin connections.

Probably one of these:
B450M-HDV R4.0
B450M-HDV

my PSU's CPU connector is an 8-pin.
Can i use half of the 8-pin to connect to the motherboard without it frying anything?

What model PSU are you using.
Sometimes PSUs come with EPS12V connector in 4+4pin form.
Then you can simply split it and use only 4pin part.

Or you can use EPS12V 8pin to ATX 4pin adapter.

 

[geofelt]

Even in unsplittable 8 pin form, you should be able to plug in one half.
The pins are keyed so you can't go wrong if you don't force anything.

 

[ayeooo444]

Do you have a link to the motherboard there are a couple with similar names. All the ones I found photos of have 8 pin connections.

It is rather uncommon to only use 4 pin connectors.

That is exactly why you can split the 8 pin connector. Pretty much what they did as modern cpu needed more power they just added 4 extra pins, but to allow use of older boards you can physically separate it.

The power stuff is designed to prevent you from doing things wrong. Unless you would apply a lot of force you generally can't plug something into the wrong slot.

Even in unsplittable 8 pin form, you should be able to plug in one half.
The pins are keyed so you can't go wrong if you don't force anything.

Probably one of these:
B450M-HDV R4.0
B450M-HDV


What model PSU are you using.
Sometimes PSUs come with EPS12V connector in 4+4pin form.
Then you can simply split it and use only 4pin part.

Or you can use EPS12V 8pin to ATX 4pin adapter.

as rock B450M-HDV R4.0 is the motheboard power supply is thermaltake bx1 bronze 650w it doesnt have a split 8 pin it only has 1 cpu connector and its an unsplittable 8 pin i was thinking about just using half of it i was just afraid it would fry my motherboard so i can do that?

 

[ayeooo444]

Even in unsplittable 8 pin form, you should be able to plug in one half.
The pins are keyed so you can't go wrong if you don't force anything.

Wouldnt the extra voltage from the other 4 pins fry my motherboard? Its not splittable.

 

[SkyNetRising]

power supply is thermaltake bx1 bronze 650w it doesnt have a split 8 pin it only has 1 cpu connector and its an unsplittable 8 pin

Double check it.
Thermaltake support site and reviews say - it's splittable 4+4pin connector.
May be you're looking at 8pin PCIE connector instead?

If it's indeed unsplittable, then use adapter shown in post #3.

 

[bill001g]

Wouldnt the extra voltage from the other 4 pins fry my motherboard? Its not splittable.

There is no extra voltage. All the connections are ground or 12 volts. There are just more wires so it can carry more total power. Your pc will only use as much power as it needs.

The reason it is keyed so it only fits one way is to make sure the wires that are 12 volts and the wires that are ground go to the proper places.