Can Inno3d GTX 1070 Will Run on Gigabyte GA-78LMT-USB3

[anustarique]

Hey Guyz!! Need Helppp
I Have Inno3d GTX 1070 Ichill GPU i JUST Need To Knw That It Can Run on My Mother Board
This is my motherboard Gigabyte GA-78LMT-USB3
My Processor Is AMD FX 6300 and psu is corsair VS650

 

[Dynomite54]

Yes It can but you cpu needs to be upgraded it will lag if you use a 1070 with a fx 6300

 

[Ahmadjon]

Yes it can run but your CPU will be bottlenecking it all the time. Even i5 4670 4690 will bottleneck 1070 in some games.
For 1070 or 1080 i5 is a minimum anything lower than that will bottleneck 1070 or 1080.

 

[anustarique]

but guyz my pc wont turn on i dont know y..
i only hear beep of starting pc but nothing else

 

[Ahmadjon]

but guyz my pc wont turn on i dont know y..
i only hear beep of starting pc but nothing else

Check your PSU cables for proper connection.

 

[anustarique]

i have checked that and all cables of psu

 

[Dynomite54]

How meany beeps?

 

[Dynomite54]

this may help http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816

 

[anustarique]

just one beep

 

[anustarique]

one beep i heared always even without graphic card insert in mobo
And its start normally....

 

[anustarique]

help guyz plzz

 

[anustarique]

one more thing guys wen i insert my graphic card to my mobo den graphic card lights and fan starts for few secong and den turm off

 

[anustarique]

any budy plz help

 

[Dynomite54]

one beep is good

 

[Dynomite54]

can you send a part picker list of your specs?

 

[anustarique]

bro its starts now
but in HDMI only

 

[Dynomite54]

bro its starts now
but in HDMI only

Ohhhh ok it may have been a bad display port/Dvi cable.

 

[anustarique]

i buyed new but still no change
i hv 1920x1080 resolution monitor but it is downgraded to 1842x1036 in Hdmi Port