Cannot adjust fan speeds - images included

[Linnaeus]

Hi everyone. I just completed my build. Everything is running smoothly except that I cannot change the fan speeds. I'm using SpeedFan program to adjust the fans but no information is being displayed that there are even fans installed.

Here is an album with descriptions to visually explain my situation - http://imgur.com/a/tpOuZ#0

If more photos are needed for further help please inform me.

 

[t3naci0ust]

Do you have all your fans connected to actual 4 pin connectors on your motherboard?

 

[Linnaeus]

Do you have all your fans connected to actual 4 pin connectors on your motherboard?

Yes they are connected to a 4-pin connector on the motherboard or the CPU fan headers.

 

[t3naci0ust]

I have a problem with that as well on mine. Maybe someone else could chime in. Sorry i couldn't help bro.

 

[Linnaeus]

I have a problem with that as well on mine. Maybe someone else could chime in. Sorry i couldn't help bro.

All good. Glad to know I'm not the only one. :U

 

[t3naci0ust]

whats really funny is that i have a completely different motherboard maker then you and still have the same issues 😛

 

[Linnaeus]

whats really funny is that i have a completely different motherboard maker then you and still have the same issues 😛

What board do you have? Gigabyte?

 

[scout_03]

did you both use this link you could made a report to they will answer http://www.almico.com/speedfan.php

 

[t3naci0ust]

Asus Crosshair V formula Z

 

[Linnaeus]

did you both use this link you could made a report to they will answer http://www.almico.com/speedfan.php

I have not. I might have just found out that SpeedFan doesn't support my board shown here: http://www.almico.com/forummotherboards.php?man=269. Only motherboard they support closest to mine is Z97 GAMING 3.

 

[t3naci0ust]

I wasn't actually using speed fan to change my pc fan speeds i was using my bios and the utility that comes with asus boards

 

[scout_03]

did you check if the latest beta one does the same you only need a user name and password to load it .

 

[Linnaeus]

did you check if the latest beta one does the same you only need a user name and password to load it .

Got the beta. More information is displaying.

http://i.imgur.com/2JG7BvH.png

CPU says it's 127°C but on Speccy and HWMonitor it's 30°C. So what do I do from here?

 

[scout_03]

could be bad sensor readings also put all fan on 100% and press auto speed in the main panel then go to configure an temp press check box and log on all of them same for fan and speed on auto .

 

[Linnaeus]

I checked all the logs and boxes except for HD1 and below. Also, on the mainpage I tried setting the values to 100% but it keeps resetting itself.

http://i.imgur.com/2mRbAs6.png

 

[scout_03]

it is on the speed page when you check all pwm you it appear .

 

[Linnaeus]

it is on the speed page when you check all pwm you it appear .

Do you mean this: http://i.imgur.com/Ft1FZnj.png? Not sure what you're saying.

 

[scout_03]

this one pres auto variated at the bottom .

 

[Linnaeus]

this one pres auto variated at the bottom .

OK I checked 'automatically variated' on the Speeds Tab of Configure but it still resets the values on the homepage from 100% to default.

 

[scout_03]

then the software it still on beta submit a question on in they will check you could receive a answer why .

 

[Linnaeus]

then the software it still on beta submit a question on in they will check you could receive a answer why .

Ah alright. Thanks for the help.

 

[scout_03]

keep us inform on what they will answer .