Cannot controll my radiator fans with Asus fan xpert 3

[ViruZHUN]

Hi!

I am using Asus Fan xpert to customize my fans RPM. However I got a Fractal design S36 which is a 360 mm radiator with 3 120 mm fans, those fans are all PWN but i use fractal designs own splitter which Isnt PWN. THe splitter headers looks like this:

1: Pin /Pin /Pin /Pin 2: Pin/Pin/NoPin/Pin 3: Pin/Pin/NoPin/Pin

I hope you understand, I am describing how a header looks like on a splitter.

The splitter is connected to the CPU fan header on the MB and the pump to the CPU OPT header.

On Asus fan xpert I only see this icon the the graph "!"

Picture:

How could I solve this?, thx

 

[gilbadon]

The third pin on two of them is missing because that is the sense line. You can only sense for one fan. The fourth pin controls the PWM. Not sure why you cannot read the speed of the one fan (they should all be the same) but it should be working. Sorry I cannot help.

 

[ViruZHUN]

The third pin on two of them is missing because that is the sense line. You can only sense for one fan. The fourth pin controls the PWM. Not sure why you cannot read the speed of the one fan (they should all be the same) but it should be working. Sorry I cannot help.

Idk why it do not work. I read other topics where answers said that 3 pin is readable. I have 4 pin fan buy the splitter do not offer all heads with 4 pins-.-

 

[gilbadon]

Is the CPU_Opt not the radiator fans? You are not going to get 3 different signals. Just 1 because there is only one fan connected to the sensing line.

 

[ViruZHUN]

Is the CPU_Opt not the radiator fans? You are not going to get 3 different signals. Just 1 because there is only one fan connected to the sensing line.

It was the CPU radiator fans, But I changed it too see if fan xpert can read the fans then, but it cant.

In order to be able to run it on CPU fan I had to disable "CPU fan error" popup.