Question Cannot install new OS on M.2, getting BSOD

[stikalo]

So, i'm not new with computers, love them from when i was young... MSDOS, WIN 3.1, ...
But i have never encountered anything like this, i guess im just getting old and lazy.

So i have this setup (see below) and i added a new m.2 ssd - WD Black 850x. I tried installing a new version of BIOS, put factory defaults. Changed USB thumb drive, USB ports, different windows image, ... and i cannot complete the installation. It ends with BSOD. Here's two of them: First right after installation is SYSTEM_SERVICE_EXCEPTION... and sometimes is KERNEL_SECURITY_CHECK_FAILURE.

Failure of new M2 drive is not possible - checked with multiple tests, all is OK.
PC in the same configuration works just fine with other SSD (with this m.2 inside, visible data aso).

From my last attempt, i have one dump file - DumpStack.txt if it helps.

Any ideas? Because im out of them


https://jpst.it/40a-p - DUMP FILE
HW INFO https://jpst.it/40a-B

 

[COLGeek]

Are you aware of this?

https://www.tomshardware.com/pc-com...strongly-advised-to-update-their-ssd-firmware

 

[SkyNetRising]

Any ideas? Because im out of them

Try with single ram module.

 

[stikalo]

Are you aware of this?

https://www.tomshardware.com/pc-com...strongly-advised-to-update-their-ssd-firmware

No, i wasnt but i did try to update the firmware but there was no update avaliable.

 

[stikalo]

Try with single ram module.

Hm... will try. But i'm writing this on the same computer but OS installed on an SATA SSD.

Try with single ram module.