Question Can't change/update from WiFi 4 to WiFi 6 on WiFi 6 supported motherboard

Mar 8, 2025
8
0
10
I just installed a new motherboard, "TUF GAMING B650-E WIFI" that lists that it supports WiFi 6E, but in my windows settings I see "WiFi 4 On" and under Network Adapters when I go into the WiFi driver's Properties, under Advanced I see that Property set to 2.4GHz channel bandwidth with Auto as the Value. I tried changing property to 5GHz or even 6GHz, but it goes back to 2.4GHz. Everything is fine with my gateway as it's fast elsewhere.

I've tried splitting my internet into 3 bands: 2.4GHz, 5GHz, and 6GHz which didn't work. I downloaded the latest driver for it, and did a BIOS update. I'm not sure what else I can do. Any help would be appreciated.
 
I just installed a new motherboard, "TUF GAMING B650-E WIFI" that lists that it supports WiFi 6E, but in my windows settings I see "WiFi 4 On" and under Network Adapters when I go into the WiFi driver's Properties, under Advanced I see that Property set to 2.4GHz channel bandwidth with Auto as the Value. I tried changing property to 5GHz or even 6GHz, but it goes back to 2.4GHz. Everything is fine with my gateway as it's fast elsewhere.

I've tried splitting my internet into 3 bands: 2.4GHz, 5GHz, and 6GHz which didn't work. I downloaded the latest driver for it, and did a BIOS update. I'm not sure what else I can do. Any help would be appreciated.
What router or AP are you trying to connect to? You have to have same capabilities on router and client.
 
  • Like
Reactions: nexus115
What router or AP are you trying to connect to? You have to have same capabilities on router and client.
I'm using an Xfinity Advanced Gateway (XB8-T) and trying to connect a desktop. I’ve connected to 2.4GHz, 5GHz, and 6GHz networks, but my speeds are still really slow. No error messages, just sluggish performance. The router is set to WPA3. Any ideas on what could be causing this?
 
I'm using an Xfinity Advanced Gateway (XB8-T) and trying to connect a desktop. I’ve connected to 2.4GHz, 5GHz, and 6GHz networks, but my speeds are still really slow. No error messages, just sluggish performance. The router is set to WPA3. Any ideas on what could be causing this?
You have to look at the link rate of your connection. 6Ghz is usually only useful in the same room as the router because it doesn't penetrate wall well.
 
  • Like
Reactions: nexus115
You have to look at the link rate of your connection. 6Ghz is usually only useful in the same room as the router because it doesn't penetrate wall well.
I checked my link rate, and it's 2402 Mbps, so my connection to the router seems strong. However, my actual internet speeds are still slow. Could this be an ISP issue, congestion, or a router setting I should check?
 
I checked my link rate, and it's 2402 Mbps, so my connection to the router seems strong. However, my actual internet speeds are still slow. Could this be an ISP issue, congestion, or a router setting I should check?
I don't know about the XB8-T, but some of the "smart" routers will limit speedtest type traffic to allow for game traffic or VOIP. I don't know what "smarts" (QOS) that router has and is trying to apply to your traffic.
 
  • Like
Reactions: nexus115
I don't know about the XB8-T, but some of the "smart" routers will limit speedtest type traffic to allow for game traffic or VOIP. I don't know what "smarts" (QOS) that router has and is trying to apply to your traffic.
Good point! I’m not sure what QoS settings the XB8-T has either. Do you know how I can check or disable any smart traffic management settings to see if that’s affecting my speeds?
 
Here's what google ai says about your router: "Band Steering: The XB8 intelligently directs devices to the most optimal Wi-Fi band for the best connection, simplifying your network and improving performance." So although you may want to use the 5GHz or 6GHz band the router is taking that decision away from you and making its own selection. You will most likely have to go through the router's settings to turn Band Steering off for your computer.