[SOLVED] Cant get 1440p resolution

[Ganyc]

Hi everyone !

I have two MSI Optix AG32CQ who should be able to be set in 1440p, but i didnt have the resolution available on W10.
The main screen is plugged with Display Port, and i have a RTX 3060.

Cant find a way to enable it 🙁

Thanks!

 

[Deleted member 362816]

Right Click and go into Nvidia control panel. Select screen resolutions select (PC) Select 1440P

 

[Ganyc]

Right Click and go into Nvidia control panel. Select screen resolutions select (PC) Select 1440P

I can't go further than 1080p on both screen.

 

[Deleted member 362816]

Upload a photo of your NVidia control panel in the resolution section.

 

[Ganyc]

Upload a photo of your NVidia control panel in the resolution section.

https://ibb.co/gy80V8F

https://ibb.co/xH0555L

here they are

 

[Deleted member 362816]

https://ibb.co/gy80V8F

https://ibb.co/xH0555L

here they are

On the 2nd photo if you go down more get out of Ultra and is there a PC resolution section like the first photo?

 

[SkyNetRising]

https://ibb.co/gy80V8F
https://ibb.co/xH0555L
here they are

Are you sure, it's Optix AG32CQ ?

Could be

Optix AG32C or​

Optix AG32CV.​

 

[bignastyid]

On the DP monitor you have selected 165HZ, the monitor only supports 144Hz @ 1440p try lowering the HZ and see if 2560x1440 becomes an option.

On the HDMI you need to scroll down to PC and with HDMI that monitor is limited to 120Hz.

 

[bignastyid]

Are you sure, it's Optix AG32CQ ?

Could be

Optix AG32C or​

Optix AG32CV.​

Definitely a possibility as those are 1080p@165hz monitors.

 

[Ganyc]

I just check the ref and it's AG32C i was thinking they were 1440p my bad -_- ...

I should have thought about it when buying them in the past 🙁 (my last GPU wasnt strong enough for 1440p)

 

[Ganyc]

Thanks you