[SOLVED] Can't get XMP to work with Gigabyte Z490 Vision G

[SirDarknight]

I'm running Corsair Vengeance RGB Pro 16GB (2x8GB) DDR4 3200MHz C16 - White (CMW16GX4M2C3200C16W) on dual channel. If I simply enable the 3200Mhz XMP (Profile 1) in my BIOS, it doesn't boot. The motherboard RAM error LED lights up and I have to reset CMOS to get it to boot again. I tried turning it down to 3000MHz but the issue persists.

 

[SirDarknight]

SOLVED.
Had to manually set the timings and voltages I found on Corsair's website.