Can't install the latest Intel drivers for i7 7700k Kaby Lake.

[IcyDemon]

Hello Guys,

To give you a quick run down of the computer specs and OS installation:

Operating System: Windows 10 Pro 64-bit (10.0, Build 14393) (14393.rs1_release.161220-1747)
Motherboard: Z270X-Ultra Gaming
BIOS: BIOS Date: 01/13/17 18:05:31 Ver: 05.0000C
Processor: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (8 CPUs), ~4.2GHz
Ram: Corsair Vengance 4x8GB 3200 Mhz
GPU: MSI GeForce GTX 970 GAMING 4G

I've been trying to install the latest Intel graphics drivers for my CPU from the link below:
https://downloadcenter.intel.com/download/26563/Graphics-Intel-Graphics-Driver-for-Windows-15-45-?v=t

Which does state that it has full support for Intel® Core™ i7-7700K Processor (8M Cache, up to 4.50 GHz) which is exactly the CPU that i have installed in the computer, however i receive the following error message when trying to install:
"This computer does not meet the minimum requirements for installing the software".

Now the error message made me think that it was due to the lack of the Bios being updated, so i went ahead and updated to the latest version "F3" and skipped out on "F4" which is the latest beta available.

I tried installing the latest driver again with out success.

Any thoughts or ideas are very much appreciated.

I'm decently good ad figuring stuff like this out, but right now i'm lost!


Edit #1:

After a bit of digging, i realised that within the device manager the intel graphics wasn't being displayed, so now assuming that it's not been enabled within the motherboard, i'm going to go have a check.

 

[Dark Lord of Tech]

Get your chipset drivers from Gigabyte site , get all the ones you need from there.

 

[IcyDemon]

Hello BlackBird, thank you for the link, however it appears that when i enabled the onboard graphics that it didn't save the first time and that was the reason for all of this, enabled the intel graphics and the latest driver is now working as intended!

Thank you for the assistance, Case closed!

 

[IcyDemon]

Is there any way for me to close the case?

 

[t53186]

Click on the " pick as the solution" green button

Is there any way for me to close the case?

 

[Dark Lord of Tech]

Hit the green solution button.

 

[belo]

just installed a kabylake i5. first cpu in a long time (think old quad cores), running around 33*C at idle seems high, but maybe it's not?

 

[Winston0120]

where did you do that? i have the same problem.

 

[jayarte]

Hello Guys,

To give you a quick run down of the computer specs and OS installation:

Operating System: Windows 10 Pro 64-bit (10.0, Build 14393) (14393.rs1_release.161220-1747)
Motherboard: Z270X-Ultra Gaming
BIOS: BIOS Date: 01/13/17 18:05:31 Ver: 05.0000C
Processor: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (8 CPUs), ~4.2GHz
Ram: Corsair Vengance 4x8GB 3200 Mhz
GPU: MSI GeForce GTX 970 GAMING 4G

I've been trying to install the latest Intel graphics drivers for my CPU from the link below:
https://downloadcenter.intel.com/download/26563/Graphics-Intel-Graphics-Driver-for-Windows-15-45-?v=t

Which does state that it has full support for Intel® Core™ i7-7700K Processor (8M Cache, up to 4.50 GHz) which is exactly the CPU that i have installed in the computer, however i receive the following error message when trying to install:
"This computer does not meet the minimum requirements for installing the software".

Now the error message made me think that it was due to the lack of the Bios being updated, so i went ahead and updated to the latest version "F3" and skipped out on "F4" which is the latest beta available.

I tried installing the latest driver again with out success.

Any thoughts or ideas are very much appreciated.

I'm decently good ad figuring stuff like this out, but right now i'm lost!


Edit #1:

After a bit of digging, i realised that within the device manager the intel graphics wasn't being displayed, so now assuming that it's not been enabled within the motherboard, i'm going to go have a check.

 

[jayarte]

I have the same problem with device manager not showing intel graphics. Did you enable it within BIOS? My motherboard is Asus Prime B250-Plus, cpu i5 7600, Win 10 64 bit. Thanks in advance.