[SOLVED] Cant Push Pull Top Mount with MSI x570?

[konglee]

Hello,

This is a new build minus the GPU for stock reasons, I was intending on setting up Push/Pull Config on AIO however the MSI x570 Motherboard sits very tall and my top mounted Rad wont clear the thermal heatsinks on the MSI x570 mobo, I have overclocked my CPU to 4.8 Ghz and I idle at 37-38 cels, but on stress test benchmark i can hit anywhere up to 75-82 cels on full load. Not sure if the push pull would help a bit kind of annoyed that i couldnt fit it. Any ideas or shared thoughts? Should i even care? or just let it sit as is.

https://imgur.com/a/cLyUQ3W

View: https://imgur.com/a/cLyUQ3W



AIO_______Corsair 115i Platinum 280mm / Corsair 140mm MLPros

also---
Case_____Corsair X5000 RGB
Mobo____MSI Mag X570 Tomahawk
CPU______Ryzen 7 5800X
RAM______G-Skill Trident Z DDR4 - 3600 (32gb - 2x 16gb)
GPU______EVGA GeForce 1080 TI SC
PSU______Corsair RM 850x

 

[USAFRet]

1. There isn't actual physical space for another layer of fans.
2. Push/Pull does not benefit as much as it sounds.
3. 82C in a full load benchmark stress test is not that bad. That load is far above what you'll see in normal use.

Just leave it as is.