Case doesn't have enough standoffs [PLEASE HELP]

[Rashad_4]

Ao i have the asrock h110m dgs MOBO. I have the corsair 88r case. The mobo only has 4 standoff holes, the other holes are just tiny black ones. Also, one of the standoffs pre-installed in the case, isn't really a standoff. It's just this screw that you screw into the motherboard. So basically i have no idea weather 3 is enough or I somehow need more.

 

[Suztera]

It should be enough. Just align the motherboard to the pre-installed standoffs after you installed your i/o shield.

 

[madmatt30]

You don't news standoffs in the 88r aa far as I'm aware for a matx board.
Those standoffs included are for the installation of an mitx board.
The case has preraised bumps on the screwholes which act as preinstalled standoffs.

 

[Rashad_4]

Wait so i don't need standoffs?

 

[Suztera]

Wait so i don't need standoffs?

The case has pre installed stand offs.

 

[madmatt30]

Line your board up with the case tray , if those 4 screwholes in the motherboard tray that line up with the 4 holes roughly round the outside corners of your board have raised bumps you do not use standoffs.
The 4 internal holes around your CPU are there simply because thats where preinstalled case mitx standoffs would be , the holes are left in your board so there is no chance of a short anywhere.
They're not to be used with screws , just use the outside 4 holes.

 

[SkyNetRising]

your board have raised bumps you do not use standoffs.
The 4 internal holes around your CPU are there simply because thats where preinstalled case mitx standoffs would be

The case clearly has standoffs and there are no raised bumps.

http://www.corsair.com/en/carbide-series-88r-microatx-mid-tower-case

Those 4 holes around CPU are for CPU cooler.