Question Case RGB Fans Connector

[Aleki45]

Hey guys,
I wanted to connect all my RGB components either to my motherboard or my Cooler Master controller to sync it all but the RGB fans on my case don't have the typical RGB fan connector, instead they have this connector shown in the picture. What type of connector is it? And what type of adapter or conversion cable should I get to be able to connect it to the motherboard or RGB controller?

---PC Specs---
Case: DEEPCOOL Matrexx 50 ADD-RGB 4F (4x120mm RGB Fans)
CPU Cooler: Cooler Master MasterLiquid ML240R RGB
Motherboard: Gigabyte A520M S2H
CPU: AMD Ryzen 7 5700X
GPU: Palit GP RTX3070 8GB
RAM: Corsair Vengeance RGB PRO SL 2x16GB 3200MHz
Storage: Lexar NM620 1TB
PSU: Fractal Anode Bronze 750W

https://imgur.com/a/llooJbV

 

[hotaru.hino]

If your motherboard has a 4-pin RGB header, then you might be able to use https://www.deepcool.com/products/Accessories/accessories/2021/11374.shtml

Otherwise, there's no ready-made converter for it, since this is a non-standard ARGB connector.

 

[Aleki45]

If your motherboard has a 4-pin RGB header, then you might be able to use https://www.deepcool.com/products/Accessories/accessories/2021/11374.shtml

Otherwise, there's no ready-made converter for it, since this is a non-standard ARGB connector.

In my motherboard I have both RGB and ARGB headers, the only problem is those fans connectors. So I'd need to buy that hub in order to make it work?

 

[hotaru.hino]

In my motherboard I have both RGB and ARGB headers, the only problem is those fans connectors. So I'd need to buy that hub in order to make it work?

If you want to use it with the motherboard, yes.