Question CH314A Bios programmer misery

[mick1964]

Hi, Everyone

I have been trying to re flash the bios on a Gigabyte B450m ds3h motherboard as board is bricked after a bad flash.

I purchased a CH314A programmer but I cannot get the clip to stay on the Bios chip it just slips off every single time, I have tried holding it on but it looses contact while being re flashed I have tried for days so was wondering if their is an alternative way to getting the programmer to attach to the chip.

Thanks in advance

 

[helpstar]

solder it to the board adapter or use a clamping adapter or buy a preprogrammed BIOS chip

View: https://www.youtube.com/watch?v=eTLwoYsQs00

 

[mick1964]

solder it to the adapter

View: https://www.youtube.com/watch?v=eTLwoYsQs00

Thanks for reply But I don't think I have the ability to do it that way

 

[helpstar]

Eventually bent the pins of the chip very careful (don´t bent at the body of the component)