Changed from Nvidia card to an AMD and i cant get my resolution correct!

[Matty_od]

So I've upgraded from a GTX 650 TI to an ASUS Radeon R9 290. While i had the 650TI i had my resolution set at a custom 1366x768- 1080p with some scaling done using the Nvidia control panel. However, now i have my AMD card i cannot seem to set that custom resolution using the Catalyst control centre. It was so easy to use Nvidia Control Panel, can someone please help me get the same resolution as i had on my Nvidia card? THANKS!

 

[Suztera]

In amd Catalyst control centre, type in the search box: "Scaling Options".
Drag the slider to 0% and apply changes.

 

[bystander]

Is there a reason you want 1366x768 with a 1080p monitor? Now that you have lots of power under the hood, why would you still want to use a smaller resolution? You should be able to right click the desktop and go to the screen resolution page and adjust to that resolution without any custom work around. That resolution is normally an option for windows.

You may find what you want here: http://www.tomshardware.com/forum/322663-33-radeon-custom-resolution-manager

 

[Matty_od]

In amd Catalyst control centre, type in the search box: "Scaling Options".
Drag the slider to 0% and apply changes.

The scaling option is grayed out

 

[Matty_od]

Is there a reason you want 1366x768 with a 1080p monitor? Now that you have lots of power under the hood, why would you still want to use a smaller resolution? You should be able to right click the desktop and go to the screen resolution page and adjust to that resolution without any custom work around. That resolution is normally an option for windows.

You may find what you want here: Hi]http://www.tomshardware.com/forum/322663-33-radeon-custom-resolution-manager

Hi thanks for the reply. I dont know much about resolutions all i know is i have a 42" HDTV connected Via HDMI. And that when i had NVidia Control Panel i was able to set a 1080p resolution and scale it to fit. I can't seem to do this on CCC

 

[Matty_od]

HI Guys never mind i think i have sorted it out. I chose 1080p from the desktop properties tab then i scaled it down a bit and then went to windows resolution manager and made changed Icons and text to large. Now it all seems to fit fine and is running at 1080p! Thanks for all your replies