Chassis intrusion? SYSTEM HALTED!

[shazzy182]

Hi guys,

i am encountering a Chassis intruded!, Fatal Error!, System Halted message,

i did the jumper resetting and reset the CMOS,

once the BIOS is reset it asks me whether to set defaults and continue or enter setup,

when i press F2 and continue with the default settings everything works fine, but when i restart the PC the god damn error is back.

before this happened i ran into some random freezes when usb is plugged in.

The RIG

GPU: R9 270 2GB version
CPU: Core2Quad q8200 🙁
RAM: 4 Gigs DDR3 :|
MOBO: Asus P5G41T M LX3.


for now i have managed to bypass this by disconnecting the keyboard and mouse from PS/2 and Connect them Via a USB connector/Converter.


How do i solve this???


Things i tried :

Jumper change
CMOS battery Change
Ram swap

Note: No bios settings to turn it off!

Thanks

 

[smorizio]

look on the mb for the sensor. if the case lets in a lot of light then sometime you cna fool a bad sensor by covering it with electrical tape. on some mb there should be a jumper on a set of pins near the speaker and on switch. if the jumper fell off you get that warning. look at the mb guild online to help you.

 

[shazzy182]

there aren't any sensor(s) in the board mate, nope no lights at all.... pretty dim as the tower is under a table ..... 🙁