complete freeze(reset not working) after tests or on gaming

dacaroglu

Commendable
May 26, 2016
5
0
1,510
hi guys first post here but lot of readings :)
i have build components like a week ago and from the begining it freezes randomly and reset dont work.
i stress tested vga nothing bad happened, did a memtest rams are ok. i am gonna loose my mind with this problem that i cant have any clue about it
when i try cpu test computer freezes up again but last temp readings are like 80 degree so i dont think overheating freezes up because sometimes it locksup itself on idle when i left computer to download.
also i checked asus web site for cpu, they claims this mobo supports amd 9370.

sorry for if i break are rule about posting, correct me about it i will be glad :)
my specs are:
Cpu: amd 9370
Mobo: asus 970 pro gaming aura
Psu: thermaltake 750w 80+ smart(comes with case v51 cvore)
Ram: kingston hyperx fury 1866mhz 16gb
Vga: Sapphire r9 270x dual 4gb 256 bit
 
What cpu cooler do you have? I think the cpu may overheat, and the MB has 7+1 power phase so that it does support the fx9370.
Also may go into the BIOS to check the +3.3V, +5V, and +12V. The PSU may have problem, if the PSU came with the case usually it is not the good one.
 
CNPS10X Performa+ zalman aircooler but isnt it should not freeze on 80c on stress test or on idle 40c freezing, my supply is thermaltake smart750 80+ bronze so its kinda bunle not like other free psu's :)
 
thanks for answer i didnt realize it might cause a free i will try with water cooler too. im thinking to get h110gt 280mm for cooling or a ice cube on cpu :))) im also trying to give back that cpu for high tdp values because as you said i can easily overclock a 8350 or 8370 to get that mhz values, i will let you know after tried with water cooler thanks
 
hey. i bought corsair h110i gt and my temps are 30c on idle yet whenever i try to run prime 95 system freezes in 10 second and reset button doesnt responds i have to power down wit pressing power button 3-4 second. my processor not even close to the danger temps im suspecting from mainboard from reset buttons unresponsiveness
 
now its gone i think its not mobo but its ai suite of asus problem making whenever i try to optimize everything in it system fails in any test. that program doesnt know system better than me 🙁 i got only one problem i checked other topics they saying if you have 1866 memory you should select d.o.c.p and 1866 on bios but when i select that computer loses stability i have kingston hyperx fury 1866 16gb dual kit