[SOLVED] Computer Start Failure

[Schxeler]

I recently just wanted a new cpu and with that came a mother board and everything, so I bought a new case also. I go to start it up and the fans go for a second and it turns off. I don’t think the psu is the issue and I just changed the mother board and it’s the same issue. I’ve exhausyed all option except the cpu. The ram is brand new so that’s not the issue either, I’m losing hope and I’ve dont know what else there is to do

 

[ss202sl]

"The ram is brand new so that’s not the issue either"
I've seen new ram fail.

Go through this and verify that you have plugged everything in tight and haven't missed anything.
http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

 

[Schxeler]

I’ve tried a lot on it, none seem to help, is there a way to tell that cpu is the problem?

 

[ss202sl]

use a different cpu. Put that cpu in a different system.

 

[Schxeler]

So I was looking at my mb and it says it only support 6th/7th gen cpu for LGA 1151. The graphics card I bought was 9th gen, do you think that could be an issue

 

[ss202sl]

No. The GPU wouldn't limiyed like the CPY. As long at the MB has the PCIe slot and you have power for the GPU, it doesn't matter what GPU you get.

 

[Schxeler]

I’m talking about my CPU, not the graphics card. So it is limited?

 

[Schxeler]

My bad I mean Cpu, was a typo.

 

[ss202sl]

What MB, and what CPU

 

[Schxeler]

MSI Pro Series Intel B250
And the i5 9600k

 

[ss202sl]

Is this the MB?
https://www.msi.com/Motherboard/support/B250M-PRO-VD#support-cpu

Verify that your CPU is on the compatibility list

 

[Schxeler]

I don’t see my CPU as compatible, so maybe that’s my whole issue.