Hey guys hows it going.
I just got a 2nd Hard drive for extra storage because I have a 120GB SSD for my boot drive.
The problem is, after I installed the HDD my computer is simply not booting up. Here's the full story.
I received the HDD, installed it on my PC. Turned my computer on, it booted just fine. But when I tried assigning the HDD a letter, I received error messages saying "format did not complete successfully". I tried assigning the HDD a few times after that but failed to do so.
After this I had some business outside so I went out, came back a couple hours later and turned on my computer, but this time it failed to boot at all.
When I turn on my computer I see the ASUS logo, and it just stays there.
My PC boots just fine when I remove the HDD.
Excuse my poor English, I've just started learning the language
Any solutions?
Here's my PC specs if you need it
ASUS M5A97 R2.0
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131873&cm_re=m5a97-_-13-131-873-_-Product
AMD Black Edition FX-8350
http://www.newegg.com/Product/Product.aspx?Item=N82E16819113284&cm_re=fx_8350-_-19-113-284-_-Product
EVGA GTX 950
http://www.newegg.com/Product/Product.aspx?Item=N82E16814487156&cm_re=evga_gtx_950-_-14-487-156-_-Product
G.Skill Sniper Series 8GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231460&cm_re=g.skill_sniper-_-20-231-460-_-Product
Sandisk 120GB SSD
http://www.newegg.com/Product/Product.aspx?Item=9SIA8HC3ZE1916&cm_re=sandisk_120gb_ssd-_-20-173-071-_-Product
EVGA 750 watt PSU
http://www.newegg.com/Product/Product.aspx?Item=N82E16817438028&cm_re=evga_750_bronze-_-17-438-028-_-Product
And the problematic HDD, WD Blue 1TB
http://www.newegg.com/Product/Product.aspx?Item=9SIA1N82KX4060&cm_re=wd_1tb-_-22-236-339-_-Product
Thank you guys in advance!!
I just got a 2nd Hard drive for extra storage because I have a 120GB SSD for my boot drive.
The problem is, after I installed the HDD my computer is simply not booting up. Here's the full story.
I received the HDD, installed it on my PC. Turned my computer on, it booted just fine. But when I tried assigning the HDD a letter, I received error messages saying "format did not complete successfully". I tried assigning the HDD a few times after that but failed to do so.
After this I had some business outside so I went out, came back a couple hours later and turned on my computer, but this time it failed to boot at all.
When I turn on my computer I see the ASUS logo, and it just stays there.
My PC boots just fine when I remove the HDD.
Excuse my poor English, I've just started learning the language
Any solutions?
Here's my PC specs if you need it
ASUS M5A97 R2.0
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131873&cm_re=m5a97-_-13-131-873-_-Product
AMD Black Edition FX-8350
http://www.newegg.com/Product/Product.aspx?Item=N82E16819113284&cm_re=fx_8350-_-19-113-284-_-Product
EVGA GTX 950
http://www.newegg.com/Product/Product.aspx?Item=N82E16814487156&cm_re=evga_gtx_950-_-14-487-156-_-Product
G.Skill Sniper Series 8GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231460&cm_re=g.skill_sniper-_-20-231-460-_-Product
Sandisk 120GB SSD
http://www.newegg.com/Product/Product.aspx?Item=9SIA8HC3ZE1916&cm_re=sandisk_120gb_ssd-_-20-173-071-_-Product
EVGA 750 watt PSU
http://www.newegg.com/Product/Product.aspx?Item=N82E16817438028&cm_re=evga_750_bronze-_-17-438-028-_-Product
And the problematic HDD, WD Blue 1TB
http://www.newegg.com/Product/Product.aspx?Item=9SIA1N82KX4060&cm_re=wd_1tb-_-22-236-339-_-Product
Thank you guys in advance!!