Here are my specs:
MSI X570 Tomahawk Wifi
5800x3d
corsair vengeance ddr4 16gb
MSI 3080 Ti Gaming X Trio
I recently purchased a 5800x3d along with a noctua cooler and fans to go with it. I now have two nf-a15 chromax fans as intake (set to same pwm header). 1 nf-a12x25 exhaust fan, and a nh-d15s (with two nf-a15 chromax fans). However, when I set the intake fans to less than 60% pwm speed in the bios fan curve, the computer won't fully boot and gets stuck on the EZ Debug CPU light. When I reset CMOS by removing the battery everything works fine again, and boots no probem, but as soon as I set those fans below 60% in the bios, the CPU light comes on again and the same thing happens. Does anyone know what is happening.
MSI X570 Tomahawk Wifi
5800x3d
corsair vengeance ddr4 16gb
MSI 3080 Ti Gaming X Trio
I recently purchased a 5800x3d along with a noctua cooler and fans to go with it. I now have two nf-a15 chromax fans as intake (set to same pwm header). 1 nf-a12x25 exhaust fan, and a nh-d15s (with two nf-a15 chromax fans). However, when I set the intake fans to less than 60% pwm speed in the bios fan curve, the computer won't fully boot and gets stuck on the EZ Debug CPU light. When I reset CMOS by removing the battery everything works fine again, and boots no probem, but as soon as I set those fans below 60% in the bios, the CPU light comes on again and the same thing happens. Does anyone know what is happening.