Computer wont load past the motherboard logo

[Kaigne]

The computer wont load past the mobo logo and wont let me go to my bios or go to the boot menu. I built this computer 2 years ago.
I have tried unplugging all the USB's, I have unplugged the ram but the computer doesn't beep saying that there is an error while loading up. (still wont load past the motherboard logo. I just used this computer last night and shut it off normally. Sadly it doesn't want to start up today.

 

[harry_r_s]

I guess your bios has a problem. Try resetting the bios CMOS according to your MoBos guide...
Also check your PSU.
And always give your build specs ! Coz sometimes it can be h/w problem...

 

[Kaigne]

I guess your bios has a problem. Try resetting the bios CMOS according to your MoBos guide...
Also check your PSU.
And always give your build specs ! Coz sometimes it can be h/w problem...

PSU: Cooler Master GX-II 750W Watt
Mobo: Gigabyte 990-FXA UD3
Ram : Corsair Vengence 4g x2 (8 gigs total)
GFX: EVGA Nvidia 660 2gb Vram
Processor : Phenom II X4 955 Black Edition
HD : WD Green 1 TB ( dont know the exact model)

I would love to get into my bios but my keyboard wont register or it is registering but its just frozen on the motherboard logo.

 

[harry_r_s]

I guess your bios has a problem. Try resetting the bios CMOS according to your MoBos guide...
Also check your PSU.
And always give your build specs ! Coz sometimes it can be h/w problem...

PSU: Cooler Master GX-II 750W Watt
Mobo: Gigabyte 990-FXA UD3
Ram : Corsair Vengence 4g x2 (8 gigs total)
GFX: EVGA Nvidia 660 2gb Vram
Processor : Phenom II X4 955 Black Edition
HD : WD Green 1 TB ( dont know the exact model)

I would love to get into my bios but my keyboard wont register or it is registering but its just frozen on the motherboard logo.

You dont have to start it.
Check this-
http://www.wikihow.com/Reset-Your-BIOS

 

[Kaigne]

Thank you for that tidbit of information. I unplugged the battery discharged any power by holding down the power button with the computer turned off and the cord unplugged, then i put the battery back into the slot, started it up, and it ran past the screen. I appreciate the help harry_r_s.