Connection of aio ti motherboard

[merecol]

Hi guys i have a thermaltake riing RGB edition and a motherboard Asus TUF z370 gaming plus.It's the First Time i Mount an aio system and i don't know where to put the cable of the fans and the One of the pump.Can You help me?

 

[Crosslhs82x2]

What cooler?

 

[merecol]

hithermaltake riing rgb 360

 

[Crosslhs82x2]

The single wire is a 9pin usb
So usually on the bottom edge of your mobo is where your 9pin usb connectors are.
Aline the pins and insert.

 

[merecol]

What do You mean about the single [strike]wireless[/strike] wire?The pump's wire or the fan's controller wire?

 

[Crosslhs82x2]

From what i saw on thermaltakes website
The fans plug into the controller box.
There should be a wire that plugs into the box that would connect to your mobo 9pin usb header on the mobo
And a power wire that connects to the box to your power supply by a 4pin molex plug.
If your power supply only has 15pin sata connections and didn't come with 4pin molex cables then you will need an adapter.

 

[merecol]

My aio fans Need to Be put into the controller and the controller has a cable with 4 pins that i have to put somewhere.Where?this cable has ti Be put to the mobo?I don't understand.And the pump's cable where i have to put on the mobo?

 

[Crosslhs82x2]

Ok sounds as if your cooler is a little different the what i saw on thermaltakes website.

If 1 of the plugs from the pump has 4pin holes and 2 little raised up portions a little off center that would most likely go to the cpu fan header.
Match the direction of the plug so the raised up portions go in between the notch on the cpu fan header.

Start with that the describe the other plugs.

 

[Crosslhs82x2]

Match that plug up.
The raised portion go either side of the notch on the cpu fan header.
Sorry worded previous instructions wrong.

 

[merecol]

One plug has three pins and It Is the One that start from the internal of the pump itself.Then there Is a four PIN cable that starts from the fans controller.

 

[Crosslhs82x2]

Did the pin we last talking about match up to the cpu fan header?

The 4 pin you are talking about now is it about 1/2 in wide 1/8 thick and have big thick pins.?

 

[merecol]

The 4 pin connector that comes from the fans controller where the three fans (12v,0.3amp)of the radiator are put fills whith the CPU fan header.The other cable with 3 pins i have put into the aio_pumps connector.I don't know where to put the cable With four pins.In CPU fan header?Does that plug of CPU fan header support electrically All that?

 

[Crosslhs82x2]

Can you send a picture?
Is that plug about 1/2 in wide and about 1/8 in thick with thicker pins.
If so that goes to your 12v molex cable from your power supply.