[SOLVED] Coolermaster hyper 212X lost screw surface protector

[anonymous890]

refer to this image:

https://imgur.com/a/PGit0cv

View: https://imgur.com/a/PGit0cv


as you can see, two of my cm hyper 212x cooler screw's surface protector got lost, what I mean is that black thing you can see on the other 2 screws. Because of it, I broke my motherboard, there was a huge deep scratch on my motherboard causes by the screws without the black thing (I refer as the surface screw protector)

What's an alternative for this? Something I cam put that won't damage the motherboard, can i use electrical tape? Or maybe a foam, im afraid it would melt. What would be the best way so that I won't scratch my mobo again?

 

[CountMike]

Rubber O ring of suitable size would do. Use them for all 4.

 

[anonymous890]

Rubber O ring of suitable size would do. Use them for all 4.

will an o ring melt? Im afraid it would melt from the heat on the the motherboard

 

[CountMike]

Lol, no way, if anything there got anywhere close to such temperature you'd have much worse trouble.

 

[tennis2]

It's called a washer.
You can buy a nylon washer for pennies at any hardware store. A standard metal washer would work also, as long as it's not too big.