Core i7 6850k w/ Rampage V Edition 10

[SkodaZek]

System:
Core i7-6850k @ 4.0ghz
64 GB Corsair Dominator Platinum 3000mhz DDR4 (8x8GB Dimms) Quad-C
Asus Rampage V Edition 10
2x EVGA GTX 1080 FTW SLI
Evga 80mm HB SLI Bridge
Samsung 950 pro 512GB PCIe x4 M.2 (OS Drive)
Samsung 850 Evo 1TB SATA3 (Data Drive)
Corsair AX1200i PSU

Self built. all l seems to be working perfectly but unfortunately my PSU did not come with (due to packaging error I'm sure) a 4 pin CPU power connector so I am running my Broadwell-E 6850K w/ slight OC to 4.0 on a single 8 PIN EATX12v connector.

I live several hours outside of nearest place where I can acquire the aforementioned cable. Is this something I need to do urgently or am I ok with the CPU running off the the single 8 pin power connector while the 4 pin is not used?

Thanks in advance for any advice offered.

 

[NEmpire95]

Unless you were really pushing your OC with LN2 or something you won't need that extra 4 pin. It's really just for added stability in the event that you were doing some extreme OCing which you wouldn't do anyway for an everyday use computer.

 

[Geekwad]

I have an extremely similar setup, and with your slight overclock you should still be OK (though if something does come up under a heavier load, suspect that first and drop back to stock).

Corsair is pretty solid on support though, and they will ship it to you directly (or to a forwarder if they can't get you directly where you are) if you register the product.

 

[SkodaZek]

Thanks for the quick responses.

I do not plan to Overclock any further than the 4.0 clock I set cpu.