CPU cooler around 120mm to 140mm

[Ximerous]

Looking for a CPU cooler under 140mm in height, it will be in a dual CPU setup so I don't think a wide mini itx one will fit, maybe it will.

Has to be LGA 1366 compatible.

 

[basroil]

Just use the Intel "stock" cooler (http://ark.intel.com/products/51225/PassiveActive-Combination-Heat-Sink-with-Removable-Fan-BXSTS100C), it will cool standard XEON chips (and no, you can't overclock XEON chips). If necessary, most 90x90 compact coolers for LGA1366 should work

 

[Ximerous]

What motherboard? What is the TDP of the CPU?

Intel S5520UR motherboard, 95W tdp.

Just use the Intel "stock" cooler (http://ark.intel.com/products/51225/PassiveActive-Combination-Heat-Sink-with-Removable-Fan-BXSTS100C), it will cool standard XEON chips (and no, you can't overclock XEON chips). If necessary, most 90x90 compact coolers for LGA1366 should work

Yes you can, I don't think I can on this motherboard but you can totally OC Xeons...

 

[basroil]

What motherboard? What is the TDP of the CPU?

Intel S5520UR motherboard, 95W tdp

Just use the Intel "stock" cooler (http://ark.intel.com/products/51225/PassiveActive-Combination-Heat-Sink-with-Removable-Fan-BXSTS100C), it will cool standard XEON chips (and no, you can't overclock XEON chips). If necessary, most 90x90 compact coolers for LGA1366 should work

Yes you can, I don't think I can on this motherboard but you can totally OC Xeons...

http://www.amazon.com/Intel-Processor-Heat-Sink-AXXCA90X902UHS/dp/B008BFAM5E

And no, Xeons built for 2 way systems can't be overclocked, even if you remove the protections against it in the bios, the number of issues will force you back to default.

 

[HardwareExtreme]

Hate to bump, but yes, 2 Xeon systems around 1366 CAN be overclocked. A motherboard supports this, the EVGA SR-2 (just be prepared to sell a kidney for it 'cuz it's still like $600 on Ebay)

So, you can use a regular heatsink on this motherboard, other than the threaded backplate, right? Right now I am thinking of snapping up one of these boards since my Z600 can't run both of my X5650s, and I have a Arctic Freezer 7 Pro I got, which with a couple screws can go into a threaded backplate, but will this heatsink work?