CPU cooling temps.

[Jack30d]

I installed a Cooler Hyper 212 EVO plus and noticed when its overloaded(100%) usage on all cores it runs cooler, like it should be running but only by 10 degrees, sort of disappointing I feel or is this amazing and I should be happy? I personally feel I should be getting a bit more. I am using AMD Athlon x4 750k. Also what temperature would be best for the card if I overclocked it right now I get 70 degrees in ideal and 59 while heavy loaded. I saw a forum post where he was getting 24 on a load and 70 ideal.

 

[i7Baby]

So - your X4 750K is running 10C cooler at full load with the hyper 212 evo than the stock cooler? So what temp at full load? Is the full load Prime 95 or something else?

What card are you talking about?

Post your complete and detailed build.

 

[GavinLeigh]

I've never seen a 100% CPU at 24 degrees. I think you should be aiming at somewhere in the 50 - 65 degree area. Adding a good cooler and it lowering temps by 10 degrees is a good result.

 

[Jack30d]

I'm getting -10 when full load from the regular ideal with nothing running with the cooler I don't have a measurement from the standard cooler
PARTS : http://pcpartpicker.com/p/hwrCqs

 

[i7Baby]

Ha Ha -10C. Are you using Speccy or some such stupid monitoring tool?

 

[Jack30d]

Amd overdrive

 

[i7Baby]

CPUs heat up. They don't go cold when you use them.

You didn't post your build so I don't know what mobo uefi software you've got.

 

[Jack30d]

Posted my build link on pcpart picker above 3 posts

 

[i7Baby]

Per http://www.msi.com/product/mb/FM2-A55M-E33.html#hero-overview use Click Bios II to get temps etc.