Hey Guys, my computer after doing a windows update and NZXT CAM software update has been running at 100*C on all cores. Both the CAM software and the MOBO bios state the CPU temps are at 100*C.
I ran an update yesterday before getting off my computer and today when I start it up multiple times my fans on my Kraken X62 spin up completely. I don't feel any heat on the RAD or the pump. I built this computer a month ago and every once in a while on boot up it would spike to 75-80 for a second or two then come right back down and everything would be fine.
PC Parts:
Intel I7-7700k
NZXT Kraken X62 AIO v.2
MSI Z270 Gaming Pro Carbon
EVGA 1080TI FTW3 Hybrid
G.Skill Trident Z RGB 16GB
M.2 NVMe 512 960 EVO
2TB WD Black
I have already checked the temperatures in two places as stated above and not sure it's a false reading considering one is from the MOBO and one from the AIO cooler. I checked to see if the AIO pump was installed correctly and am 100% sure it is. I also tried tightening the pump and on two of the screws I could get another 1/4 turn. Didn't fix the issue though. What else could be wrong?
I ran an update yesterday before getting off my computer and today when I start it up multiple times my fans on my Kraken X62 spin up completely. I don't feel any heat on the RAD or the pump. I built this computer a month ago and every once in a while on boot up it would spike to 75-80 for a second or two then come right back down and everything would be fine.
PC Parts:
Intel I7-7700k
NZXT Kraken X62 AIO v.2
MSI Z270 Gaming Pro Carbon
EVGA 1080TI FTW3 Hybrid
G.Skill Trident Z RGB 16GB
M.2 NVMe 512 960 EVO
2TB WD Black
I have already checked the temperatures in two places as stated above and not sure it's a false reading considering one is from the MOBO and one from the AIO cooler. I checked to see if the AIO pump was installed correctly and am 100% sure it is. I also tried tightening the pump and on two of the screws I could get another 1/4 turn. Didn't fix the issue though. What else could be wrong?