Crashing when installing AMD Drivers

[DOLF]

So recently I had a hard crash on my system while playing overwatch. After this crash windows would enter a constant boot loop until going into to recovery and troubleshoot settings. Windows would load into safe mode with no problems. So I tried to uninstall the display driver but this caused even more issues and eventually led to me reinstalling windows. After reinstalling Windows for the first time nothing was solved and led to hard crashing on startups. So after this I decided to get a aftermarket cooler since I had had heat issues prior to this. I again reinstalled windows for a second time. This solved hard crashing and heat issues and I thought everything was OK. When I tried to install the AMD drivers for my 270x my it caused a black screen. Windows would then enter a boot loop and continued until recovery again. I then booted into to safe mode with networking to attempt a clean install using ddu after ddu uninstalled all the drivers I repeated the prior step and the same thing happened. I then tired to reset my Bois settings to make sure nothing was causing any issues and I noticed pourple lines running across it which wasn't there before all of these steps. I have reported the reinstall multiple times from a separate hardrive and still nothing has changed I am still stuck with a boot looping windows or a basic version of Windows using the basic display driver only. Please help?
CPU:FX-6300
MOBO:ASRock 960g (the yellow and black one)
RAM: Crucial Ballastix sport 8gb 1600 MHz
HDD1: WD Blue 1tb
HDD2: WD black 160gb
PSU: EVGA 500 watt silver certified
GPU: HIS R9 270x
Cooling: Hyper 212 LED and multiple case fans
If any one has any questions to help find a solution please ask.

 

[CountMike]

At this stage I would consider changing GPU.