Question crystal disk info and other monitoring software missing c1 info ?

[meganrussel]

3 seagates , all of them 160gb , one of them is pipeline seagate, i get knocks in it when delete a file or when access the drive or click a shortcut to that drive , so i read that it might have that advanced power management apm abled .so then came across reading about load/unload cycles , but i dint see anything related to this in crystal disk info or everest monitor smart . i see only power cycle count, start stop count ,nothing about load /unload. this pipeline is st3160316cs -only this drive have apm feature ,other 2 doenst.

there is no c1 loadunload cycle parameter listed in everest or crsytal disk info for any drive i have . please kindly guide me , thank you.

 

[SkyNetRising]

Why does C1 matter to you? That is one of least important parameters.
05 and C5, C6 - those are important. C7 also somewhat important.

Show screenshots.

 

[meganrussel]

thank you, i wanted to see load unload cycle , that head knock times parking times in harddisk , i read c1 parameter shows that

 

[USAFRet]

If you were to know this value (you can't) what would you do differently with these drives?

 

[SkyNetRising]

thank you, i wanted to see load unload cycle , that head knock times parking times in harddisk , i read c1 parameter shows that

You have 9 pending sectors. That's the real problem there.

You can resolve pending sectors with victoria software.
Perform scan with remap option.

Официальный сайт программы Victoria HDD/SSD

Скачать Victoria 5.37 HDD/SSD 2021 на русском языке. Ремонт HDD, SSD, NVMe, технология SMART на русском языке. Восстановление информации с HDD в г. Гродно.

hdd.by

Download link at the bottom of the page.

 

[meganrussel]

#SkyNetRising ah yes i have done this before in this same drive , i dont have time now, sure will do it for other drives i have too , but i wanted to know that, is it possible crystal diskinfo cant show that c1 for some drives ?

 

[meganrussel]

@USAFRet , yes i have it backup , just using thse drives lightly for download movies and torenting ,pdfs , studying , thats all ,no time for games or editing etc...

 

[SkyNetRising]

i wanted to know that, is it possible crystal diskinfo cant show that c1 for some drives ?

Not all drive models have C1 SMART parameter.
For example Crucial SSDs don't have it.
WD HDDs usually have it.
Seagate HDDs - some models have it, some models don't.

 

[meganrussel]

thank you @SkyNetRising , i really wanted to know about that .