Hello, so I am doing my first custom hardline water cool loop and when I went to go fill it and cycle the pump I encounter a problem where after the 2-3cycle I would fill up the water distro plate and turn it back on, well then it won’t move any of the water out of the main distribution plate water way and into the tubes, and in some of the tubes only a small amount of water will be flowing, and the tubes are not full yet. I have taken everything apart to check if clogged and nothing, I blew into the tubes to see if anything was in the radiators and nothing. Emptied and refilled it multiple times and nothing chnages, i don’t know what can be the problem here. This is what I am using.
video:
View: https://vimeo.com/404193993
distro plate: EKWB o11-distro plate G1 3.1 ddc pump
Gpu block: byski 1080ti
Cpu block: EK quantum velocity intel block
video:
distro plate: EKWB o11-distro plate G1 3.1 ddc pump
Gpu block: byski 1080ti
Cpu block: EK quantum velocity intel block