[SOLVED] DDR4 Ram ?

darenpink

Reputable
Dec 14, 2018
49
0
4,530
Hi my board only takes up to 2400mhz ram and i have just found that my ram i have installed is 3200mhz ram and running at 2133mhz - my question is why is it not running at 2400mhz and if i buy 2x16gb ddr4 2400mhz ram will it run at the correct 2400mhz ?

My ram at moment : DDR4 corsair 4x4gb 3200mhz
morherboard : B250M-Gaming 3
 

darenpink

Reputable
Dec 14, 2018
49
0
4,530
What cpu do you have?

From the spec page for the motherboard

“To support 2400 MHz or XMP memory, you must install a 7th generation processor.”
I have a i7 6700k - i have tried enabling xmp in bios but still it reads 2133mhz - i know the ram is 3200mhz and my board only goes up to 2400mhz but just cant understand why its reading 2133mhz - im looking at buying the correct ram which is 2400mhz just wondered if that would change it ?
my motherboard manual says : Supports 7th/ 6th Generation Intel® Core™ Processors
 
I have a i7 6700k - i have tried enabling xmp in bios but still it reads 2133mhz - i know the ram is 3200mhz and my board only goes up to 2400mhz but just cant understand why its reading 2133mhz - im looking at buying the correct ram which is 2400mhz just wondered if that would change it ?
You have a 6th gen cpu. Take a look at the spec on the motherboard website, it only supports 2400/XMP with 7th gen CPU’s.
 

darenpink

Reputable
Dec 14, 2018
49
0
4,530
ah right so the i7 is a 6th gen cpu ? - so i was looking at getting more ram as in 32gb instead of the 16gb i have now - so what do i look for corsair 2133mhz ddr4 ram ? if you have a link that would be great this is a bit new to me ?
RAM is best bought and used as a matched kit. If you want 32gb it is best to get a 2x16gb kit.
will this ram linked below be ok and thanks for your help where i was going wrong is i thought the i7 on my cpu meant 7th gen doh

https://www.scan.co.uk/products/32g...0-(2133)-non-ecc-unbuffered-cas-13-15-15-28-x
 
  • Like
Reactions: darenpink
Solution