OK I used to have standard setup with cable modem and wireless router. My cable modem died and person from cable network came and replaced the old one with the new one, which is not only a modem but also a router! So I checked both routers (the new modem-router and the old router) and found out that the old router has the better signal strength than the new one, so I opted out to use the new modem as the router. Btw the modem-router is Cisco EPC3925, so I clicked "disable wireless" and then "log off" and now it all goes through my old router as I wanted, but the problem is I can't access that same router via 192.168.1.1. and I don't know why! I can access it from my second computer and from my phone, but not from my host computer. It just keeps loading and nothing happens.
So the new router-modem loads fine (its ip address is 192.168.0.1.), but the old router that I use doesn't. What do I have to do to be able to log into my old router from my host computer?
Thanks.
So the new router-modem loads fine (its ip address is 192.168.0.1.), but the old router that I use doesn't. What do I have to do to be able to log into my old router from my host computer?
Thanks.