deleted

[HDMI703]

No context

 

[ShakedG]

I'm assuming you meant to ask how to turn them *off*. Go to your UEFI BIOS -> Advanced -> Chipset Configuration -> disable On/Off Play

 

[ak195]

May be it will help:
https://support.microsoft.com/en-us/kb/817900

You can also do it from bios->advance setting->peripheral options, There will be usb plug option. Then change settings from there.

 

[ShakedG]

May be it will help:
https://support.microsoft.com/en-us/kb/817900

You can also do it from bios->advance setting->peripheral options, There will be usb plug option. Then change settings from there.

Ok i am gonna try the bios first

What I sent is the exact way to do it through BIOS.

 

[ShakedG]

May be it will help:
https://support.microsoft.com/en-us/kb/817900

You can also do it from bios->advance setting->peripheral options, There will be usb plug option. Then change settings from there.

Theres no peripheral options in advenched tab

In the chipset configuration turn On/Off off, and then turn Deepsleep on. Then turn it off AND WAIT A MINUTE. What this should do is make sure your mobo doesn't take any power once you shut your PC down, but remember your mobo has a battery, so you need to wait a minute for it to fully power down.

 

[jsmithepa]

So i just installed some 5V leds into my case and connected them into the back panel usb and when i turn my computer off they are still on. how i can turn them on ?? you can see my pc specs in my signature

These days, the Power wire of the USB are designed to stay on, so you can bring the computer back to life when you hit your USB keyboard or your USB mouse or your USB connected Infrared, or some folks like to connect their mobiles to the PC USB to charge, even when the PC if off/sleep. Are you sure you want them turned off?

If you just want some LED indicator, just wire them to a spared HDD power connector, those are guaranteed to be off when sleep/OFF, don't wire them to USB.

 

[ShakedG]

So i just installed some 5V leds into my case and connected them into the back panel usb and when i turn my computer off they are still on. how i can turn them on ?? you can see my pc specs in my signature

These days, the Power wire of the USB are designed to stay on, so you can bring the computer back to life when you hit your USB keyboard or your USB mouse or your USB connected Infrared, or some folks like to connect their mobiles to the PC USB to charge, even when the PC if off/sleep. Are you sure you want them turned off?

If you just want some LED indicator, just wire them to a spared HDD power connector, those are guaranteed to be off when sleep/OFF, don't wire them to USB.

It is very possible through the BIOS to turn the USB ports off when the PC is off

 

[ak195]

Which motherboard you are using? and check for "ErP Compliance" option in bios also.

 

[ak195]

Some PSUs have a +5V Standby rail which is always on, even if computer is off. Many modern motherboards use it for powering up USB devices.
May be the lights can switch off when you flip the PSU switch after you shutdown your system. Its not a problem basically, its a feature.

 

[ShakedG]

Which motherboard you are using? and check for "ErP Compliance" option in bios also.

I am using ASRock B85 Pro4 and also i dont wanna switch the psu button everytime but maybe adding a small power switch into the led power cable (the led cable comes out of the case and then into usb

Did you try enabling deep sleep? I'm fairly sure that is what Asrock calls their ErP ready settings. Try Disabling On/Off play (which is the option to charge through USB ports when the PC is shut down), and also enabling deep sleep (which is a setting that uses little to no power, therefore theoretically supplying no voltage to the USB ports)

 

[ShakedG]

Which motherboard you are using? and check for "ErP Compliance" option in bios also.

I am using ASRock B85 Pro4 and also i dont wanna switch the psu button everytime but maybe adding a small power switch into the led power cable (the led cable comes out of the case and then into usb

Did you try enabling deep sleep? I'm fairly sure that is what Asrock calls their ErP ready settings. Try Disabling On/Off play (which is the option to charge through USB ports when the PC is shut down), and also enabling deep sleep (which is a setting that uses little to no power, therefore theoretically supplying no voltage to the USB ports)

I changed the deep sleep from disabled to s5 mode and boom when i shut down my pc the leds turn off. Problem solved

Great! I'm glad your problem was resolved