Desktop build issues

Richard Gerhart

Reputable
Jan 21, 2015
6
0
4,510
So I'm having ALOT of issues with my desktop build
my USBs are no longer working
the desktop powers on SOMETIMES
I've gotten bios error screens and all kinds of problems but i don't understand why all my parts are new save for the old laptop parts and my temp graphics card till i can afford the one i want tho my desktop did run with and without it just fine here is my build and ask me questions to help me please

Case: Rosewill Ranger-M
PSU: Antec VP-450
Motherboard: ASUS M5A78L-M LX PLUS
GPU: ATI Radeon x1800
Processor: AMD FX 8320
RAM: CRUCIAL 4GB DDR3 1600 MTs
Old laptop hard drive and 2 old desktop hard drives
old laptop wireless card + adapter
and old laptop CD/DVD drive + usb adapter
 
Whay drive is the OS on?
Is it a new/fresh OS install?
Old drives *may* no longer be good,
they may not have failed, but one could be on its way out.
With that mix of parts, do you have all the right drivers?
 
i was using the old laptop hard drive os windows 7 so i could install linux but it has been working right and the old hard drives work great on anything else so its no that plus my usb is no longer working which i need to install linux
 
well i had it working for a bit then shut it down to find out how to intsall linux yada yada so i could use that instead of windows but then i started it back up ready to go and now the usbs dont work so the disk driver i have cant be read so how can i get the usbs to work again so i can install linux i tried removing the battery and all kinds of other basic troubleshooting that i found and still nothing not even the case usbs work
(thx for help btw)
 
On the motherboard, take out the CMOS battery (Round battery, probably labeled CR2032 - or something close), 1st disconnect the power & push the start battery to 'de charge' everything, leave out the battery for about 1 minute. Put it back in, disconnect the HD's and any other laptop part & see if the system post & you can get to the bios.
 
still nothing just the green motherboard light i have nothing else connected except the psu (now after trying your idea) the RAM and the processor but its still not powering on

Edit: Just assembled out of the case with the exact same issue i just dont understand what my problem is