I wanted to upgrade my graphics card to a 6900xt, but first had to replace the PSU. Went from Seasonic 650w to a EVGA 1200w. Being a bit lazy I decided to use the SATA cables from the old PSU, I put everything back together including the new GPU and when I turned it on I smelled burning and was presented with a No boot at startup.
I realized my two SATA drives were burned up but my M.2 and 2 HDDs seemed OK. The m.2 was corrupted or something so I reinstalled windows on it and everything seemed OK until I started playing Cyberpunk. The game crashes very often, although sometimes I can get an hour before a crash. Often every few minutes it crashes.
Suspicious, I tried running Prime95 and I am getting crashes in that too. If I stop a test fast enough I can generate a report:
FATAL ERROR: Rounding was 2.020321878e+10, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
What's everyone opinion here? Is everything ruined or could I maybe try replacing a few of the components?
Currently running is Asus B550, 16GB dual channel, AMD 5600x, 1 tb M.2, 6900xt, EVGA 1200w P3, 2 HDDs, although the oldest one which is about 4 years seems to be dying, has bad sectors.
I realized my two SATA drives were burned up but my M.2 and 2 HDDs seemed OK. The m.2 was corrupted or something so I reinstalled windows on it and everything seemed OK until I started playing Cyberpunk. The game crashes very often, although sometimes I can get an hour before a crash. Often every few minutes it crashes.
Suspicious, I tried running Prime95 and I am getting crashes in that too. If I stop a test fast enough I can generate a report:
FATAL ERROR: Rounding was 2.020321878e+10, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
What's everyone opinion here? Is everything ruined or could I maybe try replacing a few of the components?
Currently running is Asus B550, 16GB dual channel, AMD 5600x, 1 tb M.2, 6900xt, EVGA 1200w P3, 2 HDDs, although the oldest one which is about 4 years seems to be dying, has bad sectors.