Question Direct air and flow liquid cooling

[demoncheg]

If you put a fan inside the bearing, you can cool the processor with a direct stream of air.
A sealed waterblock will allow the chip to be cooled by a stream of water.

 

[rgd1101]

is this a question or something?

 

[USAFRet]

If you put a fan inside the bearing, you can cool the processor with a direct stream of air.
A sealed waterblock will allow cooling with a stream of water.

"inside the bearing" ?

Please....more description.

 

[demoncheg]

"inside the bearing" ?

 

[USAFRet]

Still unsure of what you're trying to do.

 

[punkncat]

The above is not going to be sufficient to cool the IHS on modern CPU. Going to have to have a contact surface between. It just so happens that aside from a heavy roller bearing as described above, modern and well tested usings have the bearing or bushing in the center of the fan alongside the motor that runs it and is integrated with the required heat sink.

If you are attempting to make a point or a statement, spell it out. Work with us here....

 

[demoncheg]

If you are attempting to make a point or a statement, spell it out.

I think cooling without thermal interface is better.

 

[punkncat]

I think cooling without thermal interface is better.

Prove it with repeatable tests.

 

[USAFRet]

I think cooling without thermal interface is better.

Show us some actual results, with and without.

 

[demoncheg]

Prove it with repeatable tests.

But the fan inside the bearing is not available for sale.
I am writing my opinion about cooling.

 

[JayGau]

You are wrong. The principle of the heat sink is to distribute the heat into a much bigger area that can be more easily cooled down. It's simple physics. Your "idea" is just way less efficient and it's why nobody has done that in the last 50 years of computer cooling.

 

[Gururu]

A centrifugal blower fan could achieve the direct type of air flow you might be getting at. But as others have said, heat transfer across aluminum and copper sinks is so much better than through air. Aluminum for example has a thermal conductivity of 205 W/mK vs air with 0.024 W/mK. Best to move heat away from the source efficiently and worry about cooling it later.

 

[demoncheg]

Aluminum for example has a thermal conductivity of 205 W/mK vs air with 0.024 W/mK

But it cools the flow of gas or liquid. The metal is hard.

 

[MJS WARLORD]

Hmmmmm No thermal paste ????? and like the rest of you i still dont get how a fan fits INSIDE a bearing.

Just wondering if this guy is trying to get not so savvy people to try something that will kill our pc's.

 

[Gururu]

But it cools the flow of gas or liquid. The metal is hard.

Flow from where to where? Current AIOs already employ a displace and dispel principle.

 

[rgd1101]

But the fan inside the bearing is not available for sale.
I am writing my opinion about cooling.

maybe you can go back to school