The other day I bought a LG 34'' inch curved monitor and hooked it to a GT73VR 7RF MSI Titan pro laptop. I noticed the mini display port on the back of the computer fit a little loose and when I used DP for the display I got a very slight amount of flickering that I didn't get when I used HDMI. To try and combat the flickering I updated my drivers and when I did GeForece Experience was uninstalled for some reason. The second I reinstalled Geforce experience my screen went black and I have been unable to use Display Port since. I can use HDMI fine, but when I plug DP in I get a black screen.
There is a message on the monitor that says something along the lines of, "Display Port is Connected. Click ok to automatically switch to Display Port." But then the screen goes black and says "No Signal." When I go into Display Settings in Windows it doesn't detect the monitor. I don't know if it's just a coincidence that it went black after intalling Geforece experience, but I doubt it. I ran a restore point and rolled back the driver to no avail. The problem persists. I also ordered a new DP Chord just in case the chord is bad.
Thanks in advance for your help!
There is a message on the monitor that says something along the lines of, "Display Port is Connected. Click ok to automatically switch to Display Port." But then the screen goes black and says "No Signal." When I go into Display Settings in Windows it doesn't detect the monitor. I don't know if it's just a coincidence that it went black after intalling Geforece experience, but I doubt it. I ran a restore point and rolled back the driver to no avail. The problem persists. I also ordered a new DP Chord just in case the chord is bad.
Thanks in advance for your help!